Download PDF version

It’s tougher to beat the heat on job sites than at backyard barbecues. Teammates need to be informed and equipped to take preventative measures against heat stress, such as finding shade, drinking plenty of water, wearing loose and light clothing, and/or taking regular breaks.

Heat-related occupational Risks

Safety professionals know that exposure to hot conditions presents a real threat to teammates. According to the most recent U.S. Heat Fatalities Map from the Occupational Safety and Health Administration (OSHA), there were 109 heat-related occupational fatalities between 2008 and 2014.

Agriculture and construction workers typically run the highest risk of experiencing heat-related problems

Agriculture and construction workers typically run the highest risk of experiencing heat-related problems. In a 2017 Professional Safety article, ‘Fire and Ice: Protecting Workers in Extreme Temperatures’, the author notes, “That construction in particular is an industry where fast-track projects must continue even in adverse weather conditions.

Heat Stress

‘Heat stress’ is a term that encompasses many different physical reactions that result from a body’s attempt to regulate its temperature in response to the environment. These physical reactions range from uncomfortable to fatal, and tend to exacerbate other workplace risks. All of these types of issues can help create safety hazards for both the worker and their co-workers.

Common symptoms of heat stress include:

  • Heat rash due to sweating and clogged pores,
  • Heat cramps due to the loss of electrolytes from sweat,
  • Heat exhaustion

Heat stroke and other heat-related health risks

These issues might not seem particularly threatening on the surface. However, they often lead to worker irritability, low morale, absenteeism and shortcuts in procedures. On the other end of the spectrum, heat stroke is a true medical emergency. Heat stroke occurs when the body becomes unable to regulate its temperature, and the condition can be fatal.

Certain environmental, physical and operational variables affect the ease with which heat-related hazards can be addressed. Of primary concern is to maintain the body’s core temperature at or near the normal level, which is approximately 98.6 degrees Fahrenheit.

Risk factors inhibiting this objective include:

  • The temperature of the work site.
  • The environment’s relative humidity.
  • Personal protective equipment (PPE) that interferes with the body’s ability to sweat effectively.
  • An employee’s workload (the body produces heat during muscular exertion).
  • An employee’s age, drug use, body weight, cardiovascular fitness, underlying health problems, and existing burns (these may damage or destroy sweat glands).
  • A lack of worker and supervisor training on heat stress.

Wet bulb globe temperature (WBGT)

There are several technical methods of assessing the risk of heat stress for a general employee population

There are several technical methods of assessing the risk of heat stress for a general employee population. One is to examine the wet bulb globe temperature (WBGT) of a work environment.

This method considers the temperature, humidity, air movement, and radiant heat sources – compared with the occupational exposure limits (OELs) recommended by organizations such as the National Institute for Occupational Safety and Health (NIOSH).

Occupational Health and Safety App

Another, and much more simple method, is to utilize the free Occupational Health and Safety App. This app can help determine the likelihood of heat stress using relative humidity and temperature data. This system is far more field-friendly than using the WBGT.

Observational indicators of heat stress may be less scientific, but it is still worthwhile for workers and frontline supervisors to learn how to keep a watchful eye. Not only are they easier to use in assessing individuals, but they can be identified more quickly and yield a faster response. There are free and helpful tools available to assist with these efforts.

OSHA-NIOSH Heat Safety Tool App

The OSHA and NIOSH App (OSHA-NIOSH Heat Safety Tool App) features real-time heat index information, precautionary recommendations based on weather conditions, and a guide for identifying signs and symptoms of heat-related illnesses, at the work sites precise location.

Teammates and supervisors should also learn to watch for the following signs of heat stress:

  • Sudden, severe nausea or headaches,
  • Increased incidents or absenteeism,
  • Chronic fatigue,
  • A lack of alertness,

Mitigation of heat exposure risks

Mitigating heat exposure risks begins with a high-quality training program

Mitigating heat exposure risks begins with a high-quality training program. Teammates need to understand the danger of heat stress – the signs, the symptoms, and prevention. Supervisors need all the worker training, plus they need to understand the need for fluid replacement, know how to adjust expectations for non-acclimatized workers, and learn the importance of removing workers at the first signs of heat illness.

Once teammates have been properly informed, they should be well-equipped for the day-to-day work of protecting themselves from hot temperatures. For supervisors, maintaining teammates’ acclimatization is one of the most important things to cover.


‘Acclimatization’ refers to the beneficial physiological adaptations that occur as a result of frequent exposure to hot environments. These adaptations take from 7 to 10 days to develop, and include more efficient sweating, stabilized circulation and the ability to work with a lower heart rate.

According to NIOSH, workers can maintain their acclimatization over a weekend, but they may need supervisors to help them gradually re-acclimatize to environmental conditions, if they are absent for a week or more.

Importance of an acclimatization program

OSHA recommends that new workers and those returning from a break should begin with 20% of their usual workload

OSHA recommends that new workers and those returning from a break should begin with 20 percent of their usual workload on their first day, increasing by no more than 20 percent on each subsequent day.

In the case of a rapid temperature change, OSHA says an appropriate acclimatization program might require even experienced workers to start with 50 percent of their normal workload, increase to 60 percent on the second day, 80 percent on the third day and 100 percent on the fourth day. 

Remember, these recommendations are in place for work situations where consecutive days are in the high heat caution ranges.

Important daily tasks for heat stress prevention might include:

  • Evaluating work site conditions and assessing heat risks.
  • Ensuring that water is available and water coolers are sanitary.
  • Actively encouraging workers to take regular drinks of water.
  • Scheduling hot or physically demanding jobs for the coolest parts of the day.
  • Implementing mandatory work/rest schedules.
  • Creating a ‘buddy system’ for workers to watch out for each other.
  • Installing shade canopies.
  • Providing air-conditioned trailers or break rooms for spot cooling.
  • Utilizing vented, full-brim hard hats and other types of warm-weather PPE.

Finally, as summer winds down you may think that it has ‘cooled’ down a bit. However, don’t think that heat stress is no longer a concern. In the chart to the left you can see that when temperatures are ‘cooler’ and the relative humidity is high, there can still be an impact to your exposures to heat stress related issues that one may not even realize.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

How Technology Helps London Fire Brigade With Incident Command
How Technology Helps London Fire Brigade With Incident Command

Drones give Incident Commanders an aerial view, increasing their situational awareness of fires and helping them to develop tactics to tackle them. Station Officer Lee Newman details how the technology was implemented by London Fire Brigade and the continued benefits. Identify external risks The Grenfell Tower fire has resulted in revisions to several operational procedures and the introduction of new equipment within the Brigade. A few months after the fire, the Brigade was tasked with setting up a trial to test the feasibility of having a drone capability to identify external risks and assess building stability at incidents, providing essential safety information that could facilitate ongoing internal firefighting operations. Implement the use of drones The Brigade implemented the use of drones and acquired a Matrice 210 V1 and a Phantom 4 Working with partners who had an existing drone capability, as well as drone experts, the Brigade began work to implement the use of drones and acquired a Matrice 210 V1 and a Phantom 4 as a trainer and reserve drone. In the summer of 2018, an Emergency Services bespoke course was run by Essex Police to train the Brigade’s team of drone pilots, who were all PfCO qualified within one week. From start to finish, it took just nine months to get London Fire Brigade’s drone team operational. Working of the drones On its first day of being available for incidents, the team received an order to attend a 15-pump fire at a leisure center, which was under renovation. They were asked to confirm if there were cylinders on the roof of the building and immediately put the drone to use. The team flew and relayed the camera footage onto a large screen that was fitted into a van provided for the trial. The drone footage was able to identify, to the Incident Commander’s satisfaction, that the cylinders were actually rolls of asphalt due to be laid on the roof as part of the renovation. If the drone concept could have proven its use in one job, this was it. The information from the drone allowed the Incident Commander to decide not to make it ‘cylinders confirmed’ and saved a lot of unnecessary extra appliance movements. Applications of drone Since that first callout, the team has been to around 300 incidents of six pumps or more, including persons in the water, fires, and various missing people’s incidents both in London and into other counties, assisting police forces. From start to finish, it took just nine months to get London Fire Brigade’s drone team operational Drone inventory The Brigade’s drone capability inventory includes a Matrice 300 with an H20T dual thermal and optical camera; a DJI Mavic 2 Enterprise Dual with multi attachments; a Mavic Air 2 and a Yuneec 520. The Brigade also has a Teradek live streaming device and multiple tablets for receiving the streamed footage. The Brigade operates with two Mitsubishi Outlander PHEVs – plug-in hybrid SUVs – and has split the drone equipment into two, with one vehicle carrying the drone and batteries, and the other carrying all the support kit and ancillaries. Working in dark conditions The drones are permitted to fly up to 400 ft above ground level or higher in an emergency and can fly as fast as 50 mph. They also can act as a loudspeaker to give instructions or reassurance and shine a bright spotlight in dark or low light conditions. 24/7 service The Brigade has eight pilots trained and operates a 24/7 service The Brigade has eight pilots trained and operates a 24/7 service. The team is working closely with its blue light partners, including the: Metropolitan Police Service, several search and rescue teams, and a host of fire services surrounding the capital, as well as giving advice to other upcoming drone teams around the UK. Use of drone in future The Brigade’s drone capability has been molded to how it sees the future and what it holds in the way of drone use. For example, the Brigade has developed a capability to drop water rescue aides to people at water incidents, which helps to keep them afloat long enough to be rescued. The drone can also be used alongside the swift water rescue teams to provide situational awareness of hazards and the resulting risks during the rescue phase. Delivering fire escape tools The Brigade also invested in fire escape hoods in late 2018 and has already demonstrated how one might be delivered via a drone to a balcony above the height of an aerial appliance while using the Mavic Enterprise 2 to relay instructions via the loudspeakers. These possible new uses are pushing the boundaries of the Brigade’s original concept and demonstrate how London Fire Brigade works to stay ahead of the curve. 

Chicago Bans Dogs From Firehouses, Despite Long-Held Tradition
Chicago Bans Dogs From Firehouses, Despite Long-Held Tradition

There is a long tradition of canines in the fire service, from Dalmatians riding shotgun in the fire truck to mixed breeds rescued from fires that later become the fire company mascot. The tradition has taken a hit recently in Chicago, where dogs are no longer allowed at firehouses after one station dog killed a smaller breed canine near a firehouse in the Englewood neighborhood. The incident The firehouse dog in Chicago, named Bones, was a mixed breed stray rescued off the street that was living at Engine 116 at 60th Street and Ashland Avenue. A neighbor was walking her smaller breed dog past the firehouse and watched in horror as Bones attacked and killed her small dog. After the incident, Chicago’s Acting Fire Commissioner Annette Nance-Holt issued a department memo: “Any and all prior permissions for dogs in the fire stations or on fire apparatuses are hereby revoked … effective immediately.” Chicago Firehouse dogs Most of Chicago’s firehouse dogs are strays that were picked up and brought to firefighters by the public. Fire crews and paramedics care for the dogs, train them, feed them and get them inoculated and spayed or neutered, then ask formal permission to keep the dogs on site. Historically, permission has been granted, in effect saving the dogs from being euthanized. Breed of choice The tradition of dogs and the fire service goes back centuries, to the 1700s, when carriage dogs first trotted alongside horse-drawn fire carriages. Dalmatians were the breed of choice, given their good temperament, calming effect on the horses Dalmatians were the breed of choice, given their good temperament, calming effect on the horses, and grace under pressure. The Fire Department of New York (FDNY) began utilizing Dalmatians as early as the 1870s. Dalmatians as firehouse ambassadors When motorized vehicles came on the scene, Dalmatians were already associated with firefighters, who continued to keep them on-site as firehouse residents and mascots. Increasingly, Dalmatians and other dogs became public ambassadors for firehouses and were involved in public education about fire safety and emergency preparedness for school and community groups. For example, Sparkles the Fire Safety Dog, a Dalmatian from Clarksville, Ark., was a character in her own set of children’s books about fire safety and traveled around the country teaching children about fire tips. reduce stress, provide comfort Currently, firehouse dogs are other breeds, too, many rescued from house fires or other tragedies. Firehouses often adopt dogs, who become symbols of resiliency, bravery, fortitude – and provide comfort and companionship for firefighters who face high levels of stress on the job. After the 9/11 attacks, two firefighters from Rochester, N.Y., gifted the FDNY Ladder 20 company a Dalmatian puppy, appropriately named Twenty. The dog served as a source of comfort to the firefighters, who lost seven members of the company in 9/11. Dogs recognize signals Taken in as a stray in 1929, a dog named Nip served 10 years with New York’s Engine Company No. 203. During his service, the dog was injured by broken glass, falling debris, scalding burns, and bruises from falling off the fire engine. Nip could recognize all bells and signals. On fire scenes, Nip could alert firefighters if he knew something was wrong and sometimes run into burning buildings to look for victims. Unfortunately, Nip was killed by a hit-and-run driver in front of the firehouse in 1939 (and was stuffed by a taxidermist and displayed at the firehouse until 1974). Dogs promote fire safety Dogs promote fire safety outside the firehouse Dogs also promote fire safety outside the firehouse. For example, accelerant-sniffing dogs are trained to detect minute traces of accelerants that may be used to start a fire, according to the State Farm Arson Dog Program. The special bond between firefighters and dogs is the stuff of legend, despite the recent unfortunate events in Chicago – an ignoble scar on a long, colorful history of dogs in the fire service. Hopes remain that the decision can somehow be reversed, based on social media postings. “This is the first tragedy I have heard of in … 25 years,” said the administrator of the Firehouse Pups group.

What Impact Has COVID-19 Had On The Fire Industry?
What Impact Has COVID-19 Had On The Fire Industry?

The COVID-19 pandemic has had ramifications for almost every industry, some more than others. With the pandemic stretching well into a second year, the non-medical consequences continue, and many are wondering about which of the required changes might become permanent. As regards the fire sector, we asked our Expert Panel Roundtable: What impact has COVID-19 had on the fire industry?