Honeywell First Responder Products BREATHING APPARATUS  (21)

Firefighting is hot, hazardous, and let's face it, grueling work. But believe it or not, the job today has become even more challenging as firefighters must deal with increased heat loads, toxic substances and other physical challenges that make structural firefighting one of the most demanding professions on the planet. So, needless to say, being well-trained, physically fit, and safely equipped can make all the difference in the world. Evolving Technology The fact is, as heat loads and toxicity exposure risks increase due to modern synthetic construction, the ways in which fires are fought are changing as well. These shifts, combined with the revolution that’s taking place in firefighter protection technology, have led to new and exciting designs in firefighter personal protective equipment (PPE) offerings. Technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits Take the tried and true SCBA for instance. Since the invention of the first breathing apparatus in the late 1910s, their primary function has been air delivery. But today, technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits. Revolution Of Life-Changing Technology Consider this: the effects of technology today impact virtually every aspect of modern life. And the same is true for the fire service, as software, thermal imaging, and wireless communications capabilities become more mainstream on the fireground. In response to these new capabilities, the consensus organizations responsible for PPE performance standards (i.e. NFPA and EN) have increased standards by mandating certain electronic components for each firefighter. But performance of these components can be limited by the fact that only so many “parts” can be attached to an SCBA, or because some capabilities are simply out of reach from a budget perspective. Over time, these limitations create long-term implications when it comes to SCBA choice, because the breathing apparatus purchased today may have to be in use for the next 15 years or more. So, what are firefighters to do? Firefighters should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future It’s More Than Air Delivery Missed opportunities for more timely safety improvements – which keep up with the pace of technology – are rooted in a false assumption that all SCBA are comprised of separate, mechanical components – and that the SCBA function is only about respiratory protection. But air-delivery is not the issue because every SCBA meets the standards, and every SCBA delivers air well. Further, looking at the SCBA merely as a separate component for air diminishes its potential to serve as a revolutionary safety technology “platform.” Safety As A System Firefighters need more than the minimum performance from breathing apparatus To keep pace with the rapid improvements in firefighter safety, firefighters need more than the minimum performance from breathing apparatus. Instead, they should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future. I’m talking specifically about platform-type products that can be easily updated with the latest technology, as soon as it becomes available, to help protect them when their lives are on the line. Key Questions To Consider When Looking For An SCBA Include: Does the SCBA have features that allow you to see, hear, and react quickly to changing situations? Can the SCBA sizing be customized to best fit each firefighter? How many total batteries are needed for the SCBA, and how does that affect long-term costs? How well does it integrate with other systems, such as communication devices, portable instruments, etc.? Does the SCBA provide you, your team, and incident command with critical information to make effective, life-saving decisions? Can the SCBA be programmed to meet your standard operating procedures, such as audible and visual alarms at 50% remaining pressure? Is the facepiece reducing or adding to overall SCBA cost and complexity? How easily can the SCBA be updated to meet changing standards? How easily can integrated accessories or features, such as thermal imaging, be added as they are developed in the future? At MSA, we develop technologically-advanced safety equipment designed to help meet today's changing fireground dynamics. We’re committed to setting the pace for safety with continuous improvements and innovations in PPE. For today. For tomorrow. For the future.

More than an outfit. More thought than one leg at a time. Putting on the uniform is not just an ordinary daily task, but a habitual part of preparing for the unexpected. Yes, a firefighter’s uniform is more than an outfit. Think about who is wearing it and the risks they are exposed to on a daily basis. The firefighter comes from a long line of heroes, a brotherhood and sisterhood, with traditions to uphold and a reputation to maintain. Their uniform is no different. Its historical navy-blue threads. Classic, professional appearance. Tactical features. Technology-driven fabric. Over time, the uniform’s engineering has needed to adapt with new designs and react to worsened exposures and more dangerous rescue missions. The 21st Century firefighter’s uniform is unique and specific to the job with current trends fixating on the best user experience while future plans focus on preventative and safety measures due to increased societal and architectural risks. Comfortable firefighter uniform So, what does the 21st Century firefighter want? Comfort. Beyond Personal Protective Equipment, it is an overwhelming plea for a more comfortable uniform to wear. This includes garments that are easy “wash and wear” materials that do not require additional ironing. Firefighters do not want to lose the professional appearance or tactical functionality of the uniform The trend calls for lightweight, breathable, cool-weather wear that is less restrictive and offers more give and more stretch so firefighters can perform their job responsibilities more efficiently. However, they do not want to lose the professional appearance or tactical functionality of the uniform. “We need something that looks presentable every time,” said Chief Robert Burdette of Grand Blanc Fire Department, Michigan. Additionally, more firefighters are also starting to wear polo shirts or mesh T-shirts under their Turnout gear, for a lighter weight, more breathable option from the traditional uniform shirt. The trend calls for lightweight, breathable, cool-weather wear that is less restrictive Risk of cancer Unfortunately, comfort is not the only concern firefighters have when it comes to uniforms, or their safety in general. As risky and demanding of a profession the fire service can be, the fires have proven not to be the most hazardous or life threatening. According to the Firefighter Cancer Support Network, “Cancer is the most dangerous threat to firefighter health and safety today.” A study conducted by the National Institute for Occupational Safety and Health (NIOSH) concluded that firefighters have a 9% increased chance of being diagnosed with cancer and a 14% increased chance to die from cancer compared to the general United States population. Chief Dennis Jenkerson of the St. Louis Fire Department in Missouri is one of many chiefs actively fighting these statistics. Responsible for 32 firehouses, Jenkerson has witnessed the reality of this threat with the loss of four of his own and understands the validity of the situation. For the last 18 months, the St. Louis Fire Department has made headway implementing a drastic culture change by evaluating everything from equipment, apparel, lifestyle and more.  Cancer affecting firefighters “It is so prevalent that everything we do anymore has to do with some emphasis on protecting firefighters from getting cancer,” said Chief Mike Ramm of Sylvania Township Fire Department, Ohio. “Cancer is the most dangerous threat to firefighter health and safety today” According to the Firefighter Cancer Support Network, the cancers that have mostly affected firefighters are respiratory (lung, mesothelioma), gastrointestinal (oral cavity, esophageal, large intestine) and kidney. “Testicular cancer is through the roof,” added Jenkerson, who has pushed his firefighters to get tested for cancers earlier than normally necessary. He also explained that the imagery of a firefighter drinking from a fire hydrant can no longer happen. He emphasized the importance of cleaning up instantly after every fire. Think of the simple act of removing grimy gloves after a call – at least one hand has been exposed to the cancerous contaminants if it was accidentally used to take off the other glove. If that unwashed, contaminated hand touches food that goes into the mouth of the firefighter, he/she is essentially eating what may cause esophageal, oral cavity or gastric cancers. Cancer is the most dangerous threat to firefighter health and safety today According to the International Association of Fire Fighters (IAFF) via the Firefighter Cancer Support Network, cancer caused 61% of the career firefighter line-of-duty deaths from January 1, 2002 to March 31, 2017. Additionally, 70% of the line-of-duty deaths for career firefighters were because of cancer in 2016. Unfortunately, this hazard is not going away any time soon. The new building materials and new house furnishings have become the culprit for this major concern. These materials are man-made and are not of natural resources. When burned, they create deadly carcinogens that the firefighters are getting exposed to firsthand. Immediate decontamination process Jenkerson’s implementation of a culture change includes an immediate decontamination process following a fire, which involves getting hosed with water, cleansing wipes for all soft tissue areas of the body and an immediate shower back at the station. “Any place you can get a five degree rise in skin temperature, the absorption level goes up 10 times,” Jenkerson warned. His firefighters are instructed to remove their bunker gear, uniform, helmet and all other equipment right away that get immediately washed once they have returned to the station. Hems, collars, cuffs and cargo pockets are areas of the uniform where toxins get caught He also restricts all firefighters and EMTs from going on a second run until they have showered and have put on a new, clean set of clothes, all the way down to their underwear. “There are no two-runs. We have to get this stuff off [of them].” Uniform manufacturers are tasked with finding a solution to help facilitate Jenkerson’s and other Fire Chiefs’ visions by designing a uniform with as little gaps and fold-over materials as possible. “Everything needs to be sealed tight,” Jenkerson explained. Hems, collars, cuffs and cargo pockets are all areas of the uniform where toxins get caught. A lightweight shirt option that offers a crew collar with a two to three button placket and a lightweight, ventilated hidden cargo pant could be the future of fire uniforms. “There isn’t another profession that has the thousands of dangers that we have every day,” Ramm explained. Additional and ongoing efforts currently underway according to the NFPA Journal, include those by the Firefighter Cancer Support Network, the Congressional Firefighter Cancer Registry, the Fire Protection Research Foundation, the FPRF Campaign for Fire Service Contamination Control, and the International Association of Firefighters. Active shooter emergency response Firefighters and EMTs increasingly need to wear bullet proof vests with the surge in active shooter calls An additional and unfortunate trend that is also sweeping the nation is the need for firefighters and EMTs to wear bullet proof vests. Departments are trying their best to arm their men and women with this protection along with ballistic helmets in certain regions due to the surge in active shooter calls. “In areas that have a lot of gang-related activity, [bullet proof vests] would be beneficial,” said Jason Reyes of Allen Fire Department, Texas. “Sometimes you go on calls when the city doesn’t have enough police to respond to calls, which creates a situation that leaves firefighters unprotected and vulnerable.” Currently the market has ballistic vests available that can either be worn over or under a firefighter’s uniform and under their bunker gear. Uniform manufacturers also offer an external vest carrier option that is worn over a firefighter’s uniform to look like part of the uniform shirt to maintain a professional appearance. Distinguishing firefighters from law enforcement “Firefighters find themselves becoming targets more and more these days,” added Deputy Chief of Operations Dwayne Jamison of Bartow County Fire Department, Georgia. “Many departments, including my own, are looking to outfit their firefighters with bullet proof vests.” Although this trend has not affected every region, industry experts can see the need becoming more widespread if threats continue to increase the way they have been. Along the same lines, firefighters want to be identified as firefighters and not mistaken for law enforcement. “We don’t want to look like police,” Jenkerson said. “We want to be identified as firefighters. Even if it takes a different stripe.” When it comes to uniform trends for firefighters, it is clear there is more to focus on than the technical details. For many fire departments, future trends could serve as a tool to prevent deadly toxins from being absorbed and from lethal bullets puncturing unprotected firefighters and EMTs. The uniform is more than an outfit. With a larger purpose than to shield a body, the uniform goes beyond the navy-blue threads, professional appearance and tactical features to one day supporting what could be a lifesaving concept. Sources Firefighter Cancer Support Network, Preventing Cancer in the Fire Service National Fire Protection Association,  Firefighters and Cancer NFPA Journal, Fast Track: Some of the national efforts underway to fight cancer in the fire service; Roman, Jesse; 2017 

The latest personal protection equipment (PPE) are being designed to meet new regulatory standards Marine firefighting encompasses activities to extinguish any type of fire in a marine environment. For many years, this meant dealing with fires on seagoing vessels, or more specifically, shipping. In this article, Richard Cranham, International Sales Manager at Bristol Uniforms, sheds light on the various fire hazards at sea and the latest protection outfits designed to meet new regulatory standards.   Nature of marine fire hazards At one time, marine fire risks were primarily associated with shipping and the vessels or their cargoes. In the 21st century, however, the seas and oceans are increasingly becoming sites for static structures. Many of these are associated with oil, gas and other mineral exploration and harvesting. Clearly the range of fire hazards associated with these different activities varies widely. In some situations, firefighters will be able to work onboard, depending on the severity of the fire, but, following a blow out or explosion aboard an oil rig or gas production platform, fighting the ensuing fire may only be possible from firefighting vessels. Also, the characteristics of the fires facing firefighters will reflect the volatility and flammability of the materials involved in the conflagration. Some materials burn much hotter than others. Some will throw off burning shards or molten materials, some can be unpredictable either due to the composition of the flammable materials involved (in particular hydrocarbons and chemicals) or prevailing weather conditions. Wind speed and direction can be particularly variable out at sea and can cause rapid changes in the levels of hazard experienced by firefighters. Personal protection equipment (PPE) to suit the conditions As with land-based firefighting, the type of personal protection equipment required is increasingly being designed to protect against the specific nature of the fire hazards most commonly encountered. New marine firefighting standards introduced for use throughout Europe equate the hazards, if not the conditions, associated with typical shipping fires with those commonly experienced in structural fires. This has led to the new Marine Equipment Directive (MarED) standards, enshrined in EU Commission Directive 2010/68/EU, to adopt EN 469 (2005) as its benchmark for basic protective clothing for firefighting (A.1/3.3). This means that, throughout the EU, local fire & rescue authorities can deal with ship-board fires occurring in rivers, docks and coastal waters wearing their regular structural fire kit. As with all PPE, compatibility is important and appropriately matched helmets, boots and gloves should be supplied For parts of the world outside the EU, a new international standard has recently been developed. The new standard, BS ISO 22488:2011 [Ships and marine technology – shipboard firefighters’ outfits (protective clothing, gloves, boots and helmet)], has drawn substantially on the work undertaken for the recently issued European Standard. Close proximity firefighting involving gas and oil fires requires protection from the intense heat and flames produced in such ‘hot fires’ and call for quite different types of protective clothing. In some circumstances this type of firefighting will require PPE satisfying ISO 15538 (2001) - Protective clothing with a reflective outer surface (A.1/3.3). New PPE designs to meet new standards Yellow outerlayer on marine firefighting garments signify its use by emergency incident crews battling different types of fires at sea. Garments meeting EN 469 (2005), as used by European municipal firefighters, can also be deployed by them when dealing with shipping fires on river estuaries, in ports and docks and in coastal waters. For fighting fires involving shipping at sea, and for other marine fire emergencies, an alternative is the new design fleet suits which are being introduced to coincide with the implementation of the new EU Commission Directive. As with all PPE, compatibility is important and appropriately matched helmet, boots and gloves should be supplied. In Europe, these should be to MarED approved standards, and include firefighting helmet to EN 443, gloves to EN 659 and firefighter boots to EN 15090 whilst the new international standard, BS ISO 22488:2011, when introduced, may be adopted in other parts of the world.   Richard CranhamInternational Sales ManagerBristol Uniforms

North America’s largest fire event, FDIC International, brings together more than 34,000 fire industry professionals this month (April 8-13) at the Indiana Convention Center and Lucas Oil Stadium in Indianapolis. First constructed in 1928, FDIC continues today in its original tradition of providing a forum for networking about the most vexing issues and sharing the most promising solutions to concerns that face the fire service. FDIC provides opportunities to learn new techniques, train alongside world-class leaders, and advance discussions among the most influential firefighters in the industry. FDIC allows practitioners and those who support the industry an opportunity to discuss frankly the latest developments in equipment and support and collaborate on how those new advancements can be best used. 27 Interactive H.O.T Sessions FDIC offers many opportunities for learning and training, starting with its 27 interactive Hands-on Training (H.O.T) sessions“FDIC is steadfastly dedicated to its fundamental principle of providing a non-ideological, non-affiliated and openly inclusive environment for sharing and collaborating among all members interested in the mission of the fire service,” says Chief Bobby Halton, Editorial Director, Clarion Fire Rescue Group, and Educational Director, FDIC International. “Whether their interests lie in operations, medical or fire, in administration, in the production and distribution of equipment, or the advancement of codes and standards, all opinions and worldviews are accepted and debated with the utmost respect and dignity.” FDIC offers many opportunities for learning and training, starting with its 27 interactive Hands-on Training (H.O.T) sessions, 78 pre-conference workshops and more than 200 conference sessions. FDIC’s immersive learning experience extends to the exhibit hall floor and outdoor demonstration area where attendees can see and try the latest products, equipment, services and technology from over 800 exhibiting companies. “FDIC is more important than ever to the fire service industry because it is now and will always be of the firefighters, for the firefighters, and about the firefighters,” says Halton. Events Co-Located With FDIC New this year, iWomen is co-locating their event at FDIC, which includes 14 timely classroom sessions spread over two days, as well as networking events geared at sharing challenges and insights in a supportive environment. Also, the Institution of Fire Engineers United States of America Branch is co-locating their AGM annual meeting and educational update at FDIC. And the National Fire Heritage Center has partnered with FDIC to promote the center, conduct its annual meeting and introduce the annual inductees into the Hall of Legends.  FDIC is more important than ever to the fire service industry because it is now and will always be of the firefighters, for the firefighters, and about the firefighters FDIC’s new MATCH! Program is a customized meeting experience that connects attending decision makers, who have an immediacy to purchase, with exhibitors whose products or services match their sourcing needs and interests. These VIP attendees can make the most efficient use of their time by accessing innovative matchmaking technology and a personal program manager to assist them with meeting scheduling and recommendations. Exhibitors At The Event FDIC’s Mobile App is a visitor’s guide to searching the exhibitor list, navigating the exhibit hall and seeing a full schedule of sessions and events. FDIC’s new parking partner, Gate Ten Events and Parking, allows visitors to reserve their parking space ahead of time. Large exhibitors headlining the Exhibit Hall include Pierce; Rev Fire Group, E-ONE, KME, Ferrara and REV Ambulance; 3M Scott Fire and Safety; and HME Ahrens-Fox. Other large exhibitors include Honeywell First Responder Products, Drager, Globe by MSA, Rosenbauer and Spartan Motors. Here are some of the timely themes covered at this year’s conference: Current updates on the development and implementation of science-based strategy and tactics Information and practices on mental health and wellness Leading advances in firefighting technology and managing an integration of technology into the decision-making process during operations Review of recent sentinel events in the fire service from actual participants Analysis of accident investigation from members of NIOSH and the CDC Updates on current research into toxicity in the environment and equipment Current thoughts on decontamination procedures presented by researchers and practitioners The value of belongingness as a tool for health and wellness, suicide prevention, a detailed examination of the sociotechnical interface and firefighting’s role going forward The complex political and operational dilemmas faced in the wildland urban interface Recruitment and retention for the volunteer fire service Networking Opportunities Abound The event takes over the city, and there are chances to network with peers everywhere they turnAt FDIC, networking starts the moment attendees arrive in town. The event takes over the city, and there are chances to network with peers everywhere they turn. Formal networking events are also organized, including the 9/11 Memorial Stair Climb, Courage and Valor 5K Fun Run, Comedy vs. Cancer, IFD Open House and Pumper Pull, Stop Drop Rock ‘n’ Roll and more.  “We want individuals to walk away feeling inspired by new ideas, tools or techniques they’ve learned in sessions or new products or services they’ve sourced on the show floor that ultimately keep them and their communities safe,” says Halton.

Honeywell TITAN SCBA facilitates easier and faster rescue of downed firefighters Honeywell has announced that its flagship Honeywell TITAN firefighter breathing equipment has been improved with a louder alarm to make it easier to find downed firefighters. Self-contained breathing apparatus (SCBA) As part of their standard turnout gear, firefighters wear an air cylinder with a respirator and facepiece known as self-contained breathing apparatus (SCBA). This equipment includes an alarm system that sounds when a firefighter goes down or is motionless to alert others they need help. Honeywell's enhanced alarm now sounds at a higher volume and with a different sound pattern in order to be heard over background noise at the scene of a fire and from a longer distance. The alarm meets new requirements from the National Fire Protection Association (NFPA). "An SCBA is a critical part of firefighter's safety gear on the fire ground, and the improved alarm will do a better job of sounding an alert if they become incapacitated or motionless," said Lynn Feiner, product marketing manager for Honeywell First Responder products. "Honeywell is committed to investing in new solutions, including connected technologies that advance safety, so firefighters can focus their energy on attacking the fire knowing their equipment has the most advanced technology." Honeywell TITAN SCBA Honeywell TITAN is the only SCBA to offer dual-motion sensors Honeywell TITAN is the only SCBA to offer dual-motion sensors - one on the firefighter's front alarm system and a second on the firefighter's back alarm system. This dual-sensing feature helps eliminate false alarms because it is better able than a single motion sensor to detect even subtle motions of a firefighter. All new Honeywell TITAN SCBAs shipped after Dec. 21, 2016, include the improved alarm system. Fire departments seeking to upgrade their 2007 and 2013 edition TITAN equipment to the newer standard should contact their Honeywell-authorised service center or a Honeywell trained technician for more information. Honeywell is an industry leader in firefighter turnout gear, supplying more than 80 percent of North America's largest 20 metropolitan areas with turnout gear and emergency response apparel. Honeywell First Responder is part of Honeywell Industrial Safety, which provides comprehensive solutions to help organisations manage workplace safety, including personal protection gear for a worker's eyes, ears, hands and head; respiratory protection; and toxic gas monitors. Honeywell Safety and Productivity Solutions Honeywell Safety and Productivity Solutions (SPS) provides products, software and connected solutions that improve productivity, workplace safety and asset performance for our customers across the globe. We deliver on this promise through industry-leading mobile devices, software, cloud technology and automation solutions, the broadest range of personal protective equipment and gas detection technology, and custom-engineered sensors, switches and controls. We also manufacture and sell a broad portfolio of footwear for work, play and outdoor activities, including XtraTuf and Muck Boot brand footwear. 

Honeywell’s latest firefighter gear, Life Guard Hood ensures firefighters’ safety Honeywell, global supplier of protective gear for firefighters and other emergency responders, has developed a new hood to better protect firefighters from the long-term health threats of hazardous substances produced when today's building materials burn. Honeywell Life Guard Hood Honeywell's new Life Guard Hood features an innovative design and fabrics that provide better blocking protection against hazardous particulates and toxins compared with traditional firefighter hoods. It also features a lighter, roomier fit that integrates with a firefighter's self-contained breathing apparatus (SCBA) and any other turnout gear. The hood was developed by Honeywell First Responder, whose products, ranging from helmets to boots to respiratory gear, is used by 80 percent of the 20 largest municipal fire departments in North America. Firefighting Gear "Fighting fires is dangerous enough, but the added risk posed by hazardous substances in smoke means we need to do more to protect the men and women who put their lives on the line every day," said Ken Schmidt, vice president and general manager of Honeywell First Responder, which provides head-to-toe protective gear for fire fighters and first responders. "Today, the most permeable piece of gear firefighters wear is their hood. We worked with fire chiefs and firefighters to develop our new Life Guard Hood, which blocks the particulates and toxins firefighters encounter in both air and water to help safeguard their long-term health." There were more than 500,000 structure fires in the United States in 2015, and new building materials make those fires even more dangerous to firefighters' long-term health. Modern synthetic products can release hazardous particulates, lethal gases and toxins when burned, and studies show that the skin and glands of the neck and face are especially prone to absorbing toxins. In addition, studies show that several types of cancer are occurring at higher rates among firefighters than the general population, according to the Firefighters Cancer Support Network, which provides education and support to first responders. Firefighters Safety Hoods such as Life Guard go a long way toward protecting responders better from airborne toxicants and particulates" "When training first responders around the country, we receive many questions about how firefighters can protect themselves better from the toxins that are present in fire smoke," said Jason Krusen, president of the Fire Smoke Coalition, which provides training to firefighters and first responders on the long-term health consequences of fire smoke. "Hoods such as Life Guard go a long way toward protecting responders better from airborne toxicants and particulates and reducing the long-term health risks." The particulate-blocking protection of the Honeywell Life Guard Hood is laboratory-proven and certified by the National Fire Protection Association. Honeywell Safety and Productivity Solutions Honeywell First Responder is part of Honeywell Safety and Productivity Solutions Group's Industrial Safety business, which provides comprehensive solutions to help organizations manage workplace safety, including personal protection gear for a worker's eyes, ears, hands and heads; respiratory protection; and toxic gas monitors. Honeywell Safety and Productivity Solutions (SPS) provides products, software and connected solutions that improve productivity, workplace safety and asset performance for our customers across the globe. We deliver on this promise through industry-leading mobile devices, software, cloud technology and automation solutions, the broadest range of personal protective equipment and gas detection technology, and custom-engineered sensors, switches and controls. We also manufacture and sell a broad portfolio of footwear for work, play and outdoor activities, including XtraTuf and Muck Boot brand footwear.