Lake Assault Boats Delivers Third Fire And Rescue Boat To The San Bernardino County Fire District

Download PDF version

Lake Assault Boats, a manufacturer of purpose-built and mission-specific fire and rescue boats, delivers its third fire and rescue boat to the San Bernardino County Fire District (SBCFD) in California. The 28-foot long vessel is serving on California’s Big Bear Lake, and is similar to one stationed in Needles, California on the Colorado River.

“We’re thrilled to deliver and place into service a third fire and rescue craft to the San Bernardino County Fire District,” said Chad DuMars, Lake Assault Boats vice president of operations. “Like our other Lake Assault Boats units in service with SBCFD, this new craft is equipped to handle a wide range of emergency scenarios, and is outfitted with particular features for a high altitude lake.”

Skyhook digital anchor

This new craft has all of the capabilities of our other Lake Assault Boats vessels"

Big Bear Lake is situated at over 6,700 feet above sea level. “Because of Big Bear’s elevation, we’ve added a fully-enclosed pilothouse and a reinforced hull that will enable us to push through ice in emergency situations,” explained Brian Wells, a SBCFD Engineer. “This new craft has all of the capabilities of our other Lake Assault Boats vessels that are performing at a very high level.”

The fireboat is outfitted with twin 350 hp Mercury Verado outboard engines controlled through the one-touch Skyhook Digital Anchor and Joystick Piloting systems. A 1500 gpm Darley pump (powered by a dedicated V-8 engine) along with a TFT monitor and three discharge ports comprise the heart of its firefighting capabilities.

Hydraulically operated bow door

A 63-inch hydraulically operated bow door (with an integrated ladder), dual dive doors, a davit crane with twin socket locations, and a fully enclosed pilothouse provide protection from the elements. The onboard electronics include dual 12-inch touchscreens mounted on the dash, Garmin radar and sonar with SideVu and DownVu, chart plotting, and a forward looking infrared (FLIR) system.

Lake Assault Boats provided three days of on-the-water orientation ahead of the boats being put into service. “Lake Assault Boats is our vendor of choice and we’re very pleased with the design, build quality, and support we receive from their entire team,” added Wells. “We continue to refine the specs to meet the growing needs of our department’s on-the-water response capabilities in San Bernardino County.”

Download PDF version Download PDF version

People mentioned in this article

Chad DuMars Lake Assault Boats

Brian Wells San Bernardino County Fire Department

In case you missed it

Building Evacuation: Integration Between Fire Panels and Voice Alarm Allows Faster Response When Every Second Counts

Combining fire alarm and voice evacuation on a single, IP-based platform accelerates emergency response and unlocks a wide range of efficiency gains. This evolution continues with a new generation of fire alarm panels. One of the main tasks for every building and safety manager consists of preparing optimally for emergency scenarios. This includes having the right protocols in place for fires to make sure that a building can be evacuated as quickly as possible when every second counts. For an optimal response, operators need as much live situational intelligence as possible; as fast as possible. Critical information includes the exact location of the fire source and current temperature levels in the immediate vicinity. Also an overview of the most critical rooms and floors that need to be prioritized for evacuation. In an ideal world, this information is available in a central location, such as a control room, from which all emergency responses are directed and coordinated. And even more ideally, the building’s fire alarm and voice evacuation systems should not only be connected and integrated – they should also deliver alerts and status reports on the same platform in a coordinated manner.For an optimal response, operators need as much live situational intelligence as possible; as fast as possible In reality, most buildings lack this level of integration and synchronization in their disparate fire alarm and voice evacuation systems. Some buildings run on patchwork solution in which both systems may be controlled in a single location, but entirely without integration whatsoever. This not only creates challenges in terms of installation and maintenance of these systems. In the worst case, the lack of integration can cost valuable seconds in response time. But system integration between fire and voice alarm solutions has not only come a long way in recent years. As the latest evolution, a new generation of fire panels helps to connect and control both systems on a single interface, thereby opening the door to immediate efficiency improvements and future innovations. Connecting IP-Based Fire Alarm and Voice Evacuation Systems For the past few years, Bosch has been offering connections between IP-based fire alarm and voice evacuation systems as a standard, out-of-the-box feature. The “Smart Safety Link” is an interface that creates a connection between fire and voice alarm systems. As a direct, plug-and-play connection, it replaces workaround solutions or relay-based connections limited to single evacuation zones in the building. As the direct takeaways from a systems architecture perspective, the Smart Safety Link requires far less cables and significantly reduces installation costs and timelines. Bosch has been offering connections between IP-based fire alarm and voice evacuation systems as a standard, out-of-the-box featureAnd by creating the connection on an IP-based architecture, the system constantly monitors the health and status of all connected devices. For operators, this significantly increases the system’s overall reliability while lowering the risk for false alarms. It also allows for replacing or repairing components as needed, right when failures happen or become imminent. The resulting systems architecture is not only more stable and reliable, but also far less complex in terms of set-up. Depending on the size of the building, one or more voice alarm systems can also be connected to the fire alarm control panels. The direct connection via Smart Safety Link eliminates the need for including additional interface modules to accommodate a voice evacuation connection, thereby keeping investment costs low. Targeted Evacuation by Building Zones Beyond the ease and efficiency of setting up a building’s alarm systems, the connection between fire alarm and voice evacuation on a single platform significantly improves emergency responses: Firstly, in case of a fire alarm the Smart Safety Link allows for voice-guided evacuation of a building by separate zones. This allows for addressing rooms and building floors closest to the fire source first, starting with the evacuation of the most endangered building occupants. This not only supports an orderly evacuation response but also helps to avoid panic and additional complications.Studies state that using voice evacuation with clear instructions creates significant time gains Secondly, the integration makes evacuations much faster overall in situations when time is of the essence. Studies such as David Canter’s “Fire and Human Behavior” clearly state that using voice evacuation with clear instructions creates significant time gains of up to 30 percent for emergency response teams compared to a non-voice alarm signal. And thirdly, the Smart Safety Link also allows for a wide range of automated emergency responses, for instance pre-recorded voice evacuation messages directing occupants of different zones to their respective nearest exits. Supported by strobes, guide lights and clear signage, this automatic combination of fire alarm and voice instructions allows operators to focus on the big picture and monitor the situation in real-time. Evolving the Link Between Fire and Voice Alarm While the integration between fire alarm and voice evacuation via Smart Safety Link has been a widely adopted feature for several years now, with constant gains in efficiency and ease of use, the evolution continues. Bosch recently released a new generation of panels that provide the foundation for immediate new functionality as well as a platform for future technologies guided by Smart Building and Internet of Things (IoT) principles.Bosch recently released a new generation of panels that provide the foundation for immediate new functionality Continuing the proven, modular concept of its predecessors, the new “Avenar” panels provide an intuitive user interface, simplified planning and streamlined purchasing process for operators and system integrators. The panels work with existing fire alarm system components, but offer enhanced scalability, computing power and functionality for future applications. Most of all, the Avenar series creates a single point of access and control for personnel and operators while putting both the voice alarm and fire alarm system components at their fingertips. A Combined Graphic User Interface for Both Systems Previously, many systems still required two separate user interface environments to control fire alarm and voice evacuation components. Here’s where Avenar bridges the gap: Users can now fully control safety equipment such as fire alarm, voice alarm, door controls, and more, directly on the Avenar panel display via the “eMatrix” feature. With its 7-inch touch screen, eMatrix puts full control of all system components on a single interface. The results include faster response times from eliminating the need to switch between platforms, as well as a one-stop overview of the latest situation.With its 7-inch touch screen, eMatrix puts full control of all system components on a single interface eMatrix displays the status of all connected fire safety equipment and evacuation zones in a color-coded format, indicating states by red, yellow, and green labels. Operators also directly see the status of automated emergency responses currently in progress, with the option to intervene manually as needed. These manual commands are available in the form of icons on screen that control sirens, strobe lights and voice announcements. Constant feedback on the progress of evacuation measures allows for an unprecedented level of control in emergency situations. Networked Solutions for Tomorrow’s Smart Buildings In a world where connectivity and cloud computing are key drivers of innovation, both panels support fast ethernet system architecture with 100Mbit data transfer rates. What’s more, fire panels and voice alarm components connect to a network, allowing for the integration of building management systems such as HVAC. In a world challenged by pandemic restrictions, remote maintenance and control are day one features of the platform. Looking into the future, the next generation not only immediately puts faster response times and better situational oversight into system operator’s hands. When it comes to smart building technologies that support emergency responses with AI-based automation for even faster turnaround, the Avenar panels also provide the hardware and connectivity to pave the way.

Aligning Research With A Proactive Approach To Wildfire Management

Science shows clearly that the way to reduce the damaging impacts of wildfires and threats to life and property is to proactively manage ecosystems that evolved with fire. This means reintroducing fire in the right ways and places combined with mimicking the effects of fire on forest structure through mechanical treatments. “Rocky Mountain Research Station's Fire, Fuel, and Smoke Science Program (RMRS) focuses on the science of risk management from ways that they can treat fuels and mitigate risks to helping communities assess and mitigate risk and be more resilient,” says Thomas C. Dzomba, Deputy Program Manager and Director of the Fire Modeling Institute. Missoula Fire Lab During the current fire season, the Missoula fire sciences lab has made two major contributions: Risk Management Assessment Team Support The Risk Management Assessment Team has directly supported incidents across the west providing maps, real-time weather, terrain, control feature, and fire behavior data and information to help fire managers determine the best courses of action and probabilities of success for various suppression tactics and strategies. Modeled Risk Of Spread Of COVID-19 Early in the season they modeled the risk of spread of COVID-19 in fire camp and evaluated key mitigation strategies. This information supported agency actions such as social distancing, module-as-one, masks, and testing, which have contributed greatly to the success in minimizing the spread of the disease under very difficult circumstances. The 5-10 year Program Plan Looking ahead to the next 5 to 10 years, the program plans to focus on: Profoundly improving the Forest Service’s ability to manage fire for the benefit of communities and natural resources by improving the understanding of fundamental processes of wildfire behavior and spread. Developing fuel-related tools, products, treatment alternatives, restoration strategies, and accurate forecasting of future conditions to help change the trajectory of increased wildfire and altered fire regimes. Improving the understanding of smoke impacts and how wildfire emissions respond to climate variability and changing landscapes, and developing mitigations. Building on and improving decision support systems, the effectiveness and efficiency of fire and forest management activities, and increasing the safety of planning and operations. Includes developing tools and models to help fire managers weigh trade-offs of decisions in real-time regarding suppression tactics, management strategies, and safety. System Development The Missoula fire sciences laboratory has a long history of producing and supporting systems for management use and will continue to engage in technology transfer in the form of system development. “We live in ecosystems that are historically fire-dependent and have been altered over time by expansion of the wildland-urban interface, external factors such as climate change and the invasion of non-native species, and decades of active fire suppression,” says Dzomba. “Our fire research must align with a more proactive approach to fire management that includes more managed fire on the landscape and a greater focus on restoring landscapes to historical fire regimes as opposed to the reactive approach of addressing wildland fire management after fire is already on the ground.” Balanced Ecosystems Wildfire Risk To Communities website provides interactive information to help communities understand and mitigate wildfire risk. Greg Dillon, Rocky Mountain Research Station, Missoula Fire Sciences Laboratory Western landscapes evolved with fire; it is a necessary component to keep ecosystems functioning and in balance. Science and research clearly point towards solutions for reducing the risk of damaging wildfires, but knowing the answer doesn’t necessarily make it easy to get there. That will take collaboration with local communities, state and federal partners, and science to help managers determine the best places and ways to more safely reintroduce fire to landscapes. Building Resilience There is no one-size-fits-all or magic bullet to make this happen. “Building resilience in our landscapes and communities will take all of us working together,” says Dzomba. “Everyone has a part to play including preventing human-caused wildfires, reducing risks through vegetation management, managing fires in some landscapes when conditions are appropriate, and building in locations and ways that make communities and homes more resistant to fire.”

RMRS Researchers Enhance Firefighter Safety Through Science

Public and firefighter safety is the number one priority at the Rocky Mountain Research Station (RMRS) in Missoula, Mont. The Fire, Fuel, and Smoke Science Program there seeks to develop tools and technology that can help protect people and communities before, during, and after wildfires. RMRS develops and delivers innovative science and technology to improve the health and use of the nation’s forests and grasslands. Their scientists put tools and knowledge into the hands of managers who can apply them to shared stewardship projects designed to reduce fuels and improve habitat and forest health. enhanced firefighter safety The fire research program has enhanced firefighter safety by improving metrics for determining firefighter safety zones and escape routes, improving and modernizing determination of fire danger, and developing systems and applications such as the Wildfire Safety Evaluator (WiSE) and WildfireSAFE to facilitate use of these metrics by wildland firefighters. The program has also pioneered the development of metrics for scenario planning and assessing wildfire risk to communities. RMRS scientists are leaders in the science of risk management, fire behavior, fire suppression and management, and treating fuels to mitigate risks, as well as post-fire impacts to watersheds and methods to help protect people and communities before, during, and after wildfires. proactive fire management USDA Forest Service is a science-based organization, and research has been part of its mission since its inception “We need to work with our interagency firefighters and industry partners to move us to a more proactive fire management posture,” says Thomas C. Dzomba, Deputy Program Manager and Director of the Fire Modeling Institute at the Rocky Mountain Research Station's Fire, Fuel, and Smoke Science Program. “We are all in this together.” USDA Forest Service is a science-based organization, and research has been part of its mission since its inception in 1905. In 1908, forester Raphael Zon, declared “Here we will plant the first tree of research,” near Flagstaff, Ariz., at the Fort Valley Experiment Station. It later became the Southwest Forest and Range Experiment Station, and eventually combined in 1953 with the Rocky Mountain Forest and Range Experiment Station. providing economic opportunities The combination created the modern footprint of the Rocky Mountain Research Station, which covers 12 states in the intermountain west and includes 14 experimental forests and 14 labs, including the fire sciences lab in Missoula, Mont. The team in Missoula collaborates with researchers globally to advance forest inventory and analysis techniques, to promote science that enhances the wildland fire system, and to provide economic opportunities by improving utilization of wood products. RMRS also conducts extensive research on watersheds, wildlife and fish, rangeland and forest health, insects and diseases, wilderness, human interactions with natural resources, and much more. The Human Performance and Innovation and Organizational Learning (HP&IOL) team is a part of RMRS and serves the entire agency in order to promote a culture of learning and foster a resilient workforce and advance innovations. fire management efforts There are many examples of how fire research can help in adapting to fire on the landscapes that evolved with it HP&IOL seeks input from employees through verbal and written interviews, focus groups, and other means. Additionally, many of the research staff work directly in support of fire management efforts, enabling them to quickly see what could make fire management or prescribed fire more efficient or safer. To promote better understanding of the importance of fire research, the fire industry should talk to partners, community leaders, and the public and show them how science helped improve decision-making before and during fire suppression efforts. There are many examples of how fire research can help in adapting to fire on the landscapes that evolved with it. For example, where have fuel treatments helped buffer communities or important resources? helping protect communities “We should tell our success stories,” says Dzomba. “Ultimately the best safety measure is to not have to fight the fire, because we’ve learned to adapt, developed mitigations and treated fuels before fire occurs to help protect communities and create more resilient landscapes.”