FIRE VALVES

An addressable loop-powered multi-sensor, with smoke, heat and CO sensing elements. The unit offers 24 different modes of operation*1 and seamlessly matches the other sensors in the ESP Range. The CO sensing element can be used to detect smoke as well as life-threatening CO levels (acting as a CO alarm). ACD-EN Features Low profile Heat, Optical and CO sensing elements CO Alarm (COHb) facility 10 year CO sensor life Programmable fire threshold level RI & LED controllable separately if required*1 2 colour LED (Polling: Green, Fire: RED) Multiple modes

FireVu is a complete solution which can be used in a wide array of challenging environments for a variety of applications, unlike some other detection methods: Aspirating smoke detectors and beam detectors can only be used indoors and struggle with large voluminous areas as they rely on smoke reaching the beam or pipes. Historically they have issues with dusty, dirty environments triggering false alarms or going into a trouble/fault state as filters become blocked, resulting in frequent extra maintenance Thermal imaging cameras are often prohibitively expensive and unless accompanied by an additional CCTV image provide little or no situational awareness, preventing the end user or system operator from being able to identify the true nature of the risk and adopt the most appropriate course of action. Triple IR detectors have a limited range, the greatest of which is listed at 65m. A complete lack of any visual ouput means that any alarm received cannot be verified, with end users or fire authorities unable to assess the situation prior to attendance. Field experience has shown that this technology is susceptible to false triggers as a result of direct sunlight, either if used externally or from nearby entrances when deployed internally. FireVu solves this situational awareness issue through full visual verification, courtesy of the real-time video stream: Draws attention to exactly what triggered the alarm and where in the field of view it is through the use of coloured boxes. Lets you immediately know the size and scale of the fire so appropriate action can be taken. From allowing someone to tackle it with a fire extinguisher to immediately evacuating the building. Provides footage of the incident which will allow for post-event analysis to help determine the cause of the fire. This means processes can be improved and the site made safer in order to ensure there’s no repeat incident.

The Taktis product range combines the very latest hardware and software to produce a control and indication system, which is powerful and sophisticated, yet simple to use and understand. Intuitive interface The large graphical touch screen provides a clear, uncluttered and intuitive interface so the end user requires minimal training. Initially configured as a fire detection and alarm system, the flexibility of the Taktis platform is such that it can be re-configured to realise many other control and indication applications, with direct integration into intelligent buildings. Slot variants Available in 4 slot and 8 slot variants, with each slot supporting a 2 loop detection card, the Taktis fire control panel ranges from 2 to 16 detection loops. The generous quantity of sounder circuits, relays and inputs provided as standard can be further increased by the addition of one or mode Taktis I/O plug in expansion cards. The Taktis Network Card allows networking of up to 128 panels and repeaters meaning that Taktis can provide reassurance to all building owners/ operators whether responsible for a small system or a large complex.

The Apollo XP95 Optical Smoke detector uses an internal pulsing infrared LED and a photo-diode at an obtuse angle. In clear air conditions the photo-diode in the XP95 detector receives no light from the LED and produces a corresponding analogue signal. The signal increases when smoke enters the chamber and light is scattered onto the photo-diode. The optical smoke detector has a clear indicator LED which emits red light when the detector is in alarm.

The Badger B15V-1 industrial fire extinguisher is extremely versatile and ready to tackle flammable liquid and electrical fire hazards. It is ideally suited for indoor applications where delicate equipment or processes require a clean extinguishing agent. It’s suitable for use on Class B and C fires. Its features include: Heavy-duty chrome plated brass valve Stainless steel handle, lever and hose band Aluminium internal siphon tube 6- year warranty 5-year periodic hydrostatic test interval UL Listed and USCG approved - Meets D.O.T. requirements Easy-to-read two-piece nameplate 15-pound capacity

Edwards Signaling E-HD fixed temperature heat detector is an intelligent analogue device that can be configured as either a 135F fixed temperature heat sensor, or a combination rate-of-rise with fixed temperature. The heat sensor monitors the temperature of the air and determines whether an alarm should be initiated. The E-HD heat detector is capable of performing comprehensive self-diagnostics and storing the data. Due to its advanced thermistor technology, the E-HD detector is ideal for sensing fast, flaming fires and for applications where smoke detection is inappropriate. It is particularly well-suited to areas such as laundries and industries where fluctuations in ambient temperature is expected.

The Chubb Novec 1230 fire protection fluid is stored as a liquid and discharged into the protected space as a gas. It puts fires out quickly by a combination of heat absorption and chemical interference with the flame by reaching extinguishing concentrations in ten seconds or less. It does not leave any residue behind, and there is no need for costly clean-up operations. Since the fluid is at room temperature it is unique amongst gaseous agents and it therefore offers compact storage. It is electrically non-conductive and offers a safety margin of up to 100%, which is higher than any other type of clean fire suppression agent. The Novec 1230 fluid has a zero Ozone depletion potential, a Global Warming Potential of just one and an atmospheric lifetime of only five days.

Brandschutz SECRETLY C 10 complies with EN 1866-1: P3-03 / 99 standards. Its operating temperature is -30 ° to 60 ° C, while its operating pressure is at + 20° C: 58 bar. Its typical applications include: electronic systems, chemical industry, areas with special hygienic requirements, machinery and equipment and more. The C 10 fire extinguisher is built of tubular steel and comes with a floor stand and holder for fire-fighting equipment. It’s throwing range is approximately 3 m and the fire hose length is 6 m. The SECRETLY C 10 is easy to handle and operate with no extinguishing agent residues. It’s environmentally friendly and easy to maintain.

The ANSUL® PREFERRED Commercial Low Pressure CO2 Fire Suppression System is designed to meet the requirements of NFPA 12, Standard on Carbon Dioxide Extinguishing Systems and is also Factory Mutual (FM) approved. The system consists of a low pressure storage unit, master valves, selector valves, manual and automatic controls, distribution nozzles, alarms, indicators, and supervisory devices as required to maintain a supply of carbon dioxide in a stand-by discharge ready state, and to provide effective distribution of agent on demand.

Chubb F850346N heat detector provides accurate temperature measurement data to the fire control panel. This intelligent analogue addressable device is compatible with the Chubb Controlmaster range of fire control panels. It provides a common communications platform for future integrated systems. The Enhanced Digital Systems Protocol (EDSP) has many unique features, including a very high level of data security.

Badger B-30-A carbon dioxide cartridge-operated extinguisher is fitted with low maintenance swivel discharge nozzle to accommodate both left and right-handed operators. It is designed with increased extinguishing agent for higher fire ratings, longer range, extended discharge times and higher flow rates. The B-30-A is UL Listed and USCG approved.

Victaulic V2702 is a standard and quick response upright fire sprinkler. The fire sprinkler is designed to produce a hemispherical spray pattern for use in light hazard occupancies which require minimal water discharge, such as bathrooms, closets and other small area applications.

The Badger ADV-20 fire extinguisher is ideally suited for addressing a wide range of DOT, USCG and commerical application market needs. It has an ergonomically designed handle and lever for ease of use. The valve threads are indexed to accomodate and permit field replacement. Additionally, heavy square thread on valve is designed for added ease of installation.

GST I-9102(UL) is an intelligent photoelectric smoke detector that can form part of a fire alarm system via connection to a fire alarm control panel. The detector illuminates to indicate its fire alarm status and transmits a fire signal to the control panel. Using infrared scattering technology, the detector receives very weak infrared light under normal smokeless conditions. If smoke particles enter the chamber, the received light signal will increase by scattering. When smoke density reaches a pre-set level, the detector will sound its alarm. In order to reduce interference and power consumption, the emitting circuit works in pulse mode to prolong the life of IR LED. GST I-9102(UL) smoke detector features: Electronically addressed Built-in microprocessor can store 14 history records Drift compensation, to suit extensive changing environments  Self-diagnostic Standard: UL 268