FIREFIGHTER UNIFORM ACCESSORIES(182)
The Xenon structural jacket is suited to structural firefighting and can be used in external firefighting and rescue activities during emergency response and training operations. Xenon designs are sportswear-inspired and ergonomically designed with reduced bulk and weight. Xenon allows free and flexible movement - without restriction - across the widest possible range of movements.Add to Compare
MSA Cairns Rescue 360R Fire Helmet shell is a brimless low-profile rescue-style, moulded in one solid colour of high-temperature, high-performance thermoplastic. The lack of brim on the back of the helmet affords use in confined space and other emergency situations where there is little room to move. The impact cap is designed to help provide increased thermal and impact protection and also provides protection from projectiles and falls. The 360R Fire Helmet is offered in seven different paint colours: black, yellow, red, white, orange, blue and green. The fire helmet features tough, non-corroding, glass-filled polymer goggle hardware. The ultra high-temperature (TPR) edge trim will not melt or drip. Nomex earlap for increased neck/ear coverage and protection. An exclusive SCBA interface front headband adjustment matches the fit of any SCBA mask. A three-position rear ratchet height adjustment ensures a secure and comfortable fit for all head sizes between 6-3/8 and 8-3/8 inches. Flannel cushion liner is removable for washing and upgrading and provides greater ease and comfort.
Haix Florian Pro is made of waterproof leather and is hydrophobic and breathable. Its inner lining is highly abrasion-resistant with fleece midlayer. The Florian Pro offers climate comfort for all seasons along with increased chemical protection. Its sole is made from foam/rubber, with highly wear-resistant shell sole with a street/terrain tread, high temperature strength and good bending comfort. It’s compliant with EN ISO 20345:2011 / EN 15090:2012.
Shelby 5283 structural firefighting glove features an outer shell of Koala Gold Cowhide leather. The glove is constructed, tested and labeled in accordance with the NFPA Standard on Protective Essemble for Structural Fire Fighting. The glove has secondary thermal protection zones strategically placed on back of hand and fingers at compression areas. The glove is certified by the Safety Equipment Institute (SEI).
ULTRAMOTION Turnout Gear is ergonomically designed to reduce fabric bulk while maximizing mobility for a full range of motion to all areas of the body. The result: athletic cut gear that comfortably moves with you. Certified to NFPA 1971 Standards - current edition.
Bristol’s NFPA style fire coat and trouser combination is based on the Ergotech™ model. Bristol manufactures firefighter garments, which meet the North American standard NFPA 1971:2007. They are tested independently by Underwriters Laboratory Inc (UL) who carry out rigorous testing on all materials, components and garments. Bristol was the first company to supply the US market with NFPA type garments manufactured in the UK using European fabrics. Usual fabric combinations: XR2 Hainsworth Titan MO9 Crosstech Q08 Thermal Quilt Coat (N2/A): Bristol design Drag Rescue Device (DRD) Underarm gussets Flip back throat tab Articulated sleeves Action pleats on back Elbow and shoulder pads Two lower box bellow pockets with flaps, pull tabs and drainholes, handwarmer pockets behind One inside patch pocket on lining Two vertical jetted pockets under front flap Radio pocket Two microphone loops Two 'D' rings on front Torch loop 75 mm triple trim reflective tape Trouser (TN2/A): Two box bellow pockets with flaps, pull tabs and drainholes Zip fly with Velcro flap Detachable 'H' braces Articulated knees with Arashield centre panel High back One inside hip patch pocket 75 mm triple trim reflective tape Two side waist adjusters and elastication at back
Toughness and durability are inherent in this traditional series of fire helmets. The UST Series of structural firefighter helmets provide traditional styling in an affordable, easy-to-maintain design. This helmet incorporates recommendations from veteran fire professionals from around the world. With an outer shell made of fiberglass, the UST provides toughness and durability. The Bullard 12-point comfort system allows for the ultimate in helmet comfort, no matter how firefighters like their helmet to ride. The Bullard Sure-Lock ratchet headband adjusts to the wearer’s head with a quick turn of the knob. Additional adjustment points permit custom fit, personalized balance and interface with the SCBA.
TPASS-3 EVACUATE is a high-performance two-way radio signaling PASS device that is intrinsically safe per ANSI/UL 913, sixth edition. For use in Class 1, Groups A, B, C, and D; and Class II, Groups E, F, and G; Division 1 Hazardous Locations. The TPASS 3 IS-R is also CSA and Industry Canada approved. The TPASS-3 EVACUATE SYSTEM provides total accountability automatically registering each TPASS-3 unit present by identifying the individual firefighter by name and ID number. Designed to meet the rigours faced by firefighters and industrial workers. Available in 30, 60, 90 and 120 second lack of motion alarm times. The Auto On feature provides the next level of assurance that PASS are not only worn, but are turned on automatically when removed from the storage position. The Accountability Storage Key is a value added benefit of Grace Industries' T PASS 3, providing a secondary means of personnel accountability. Operating Temperature Code T6. CSA C22.2 No. 157-92. FCC part 15. Industry Canada.
VE GEAR offers value-engineered turnout gear, certified to NFPA 1971 Standards, at a price that meets the needs of budget-conscious departments. It is fully equipped with the necessary options to ensure safe and functional performance. With VE Gear, you know you are getting tough, reliable gear that will not compromise protection.
The FX Series fiberglass, contemporary style structural fire helmet is designed to withstand frequent exposure to chemicals and hydrocarbons. Certified to NFPA 1971, 2007, this helmet incorporates recommendations from veteran fire professionals from around the world. A low center of gravity provides FX models with a balanced and stable fit, increasing overall comfort. The Bullard Sure-Lock ratchet headband adjusts to the wearer's head with a quick turn of the knob. Additional adjustment points permit custom fit, personalized balance and interface with the SCBA. FX helmets can also be customized by the Bullard Logo Shop. The Bullard Logo Shop uses the latest pad printing technology to print your logo or insignia in vivid colors. FX helmets feature 3M Scotchlite striping, which retains reflectivity to 500° F (260° C). That makes Scotchlite the toughest material available for helmet markings. This series includes models that meet CE requirements and U.S. Navy requirements.
Bristol’s Ergotech Action™ fire coat and trouser combination is a lightweight construction, designed to minimise wearer heat stress whilst meeting the requirements of EN469:2005 Level 2. Widely used throughout the world, where the European standard is recognised as the required protection standard, this design was introduced in 2004, following extensive physiological tests on firefighters to measure the level of heat stress resulting from the wearing of a range of different fabric combinations. The two most common fabric combinations are: XR2 Hainsworth Titan M10 Gore-Tex Airlock N21ME Nomex viscose lining and PS1 PBI M10 Gore-Tex Airlock N21ME Nomex viscose lining Ergotech Action™ coat (model EA2/A) Collar and throat tab shape provide optimal compatibility with helmet and firehood Shoulder shape and increased upper sleeve allow full rotational mobility in shoulder and arm Shaped panel over the shoulder eliminates the shoulder seam and makes a smoother line with greater comfort when wearing breathing apparatus Increased underarm gusset allows more manoeuvrability when reaching overhead. Two action pleats added at the back shoulder Ergotech Action™ trouser (model TEA2/A) Articulated knees with convex seams around the knee for greater flexibility when bending and climbing Shaped seaming on back of knee to reduce fullness when crawling Top of trouser contoured to the body with raised back and elasticated adjustment across the lumbar region 'H' pattern braces Two large half bellow pockets
Made of 7-ounce, flame-resistant twill, it features two chest pockets with flaps and button closures, flame-resistant melamine buttons and a button-down collar. It also has triple-stitched main seams and a shaped shirt tail. Field-tested 7-ounce, lightweight, flame-resistant twill NFPA 70E compliant Flame-resistant melamine buttons
Operator™ Designed by and specifically for military use, this glove allows you to perform with surgical precision. The ergonomic fit and tactile sensation found in these gloves are unmatched. Constructed of goatskin leather palms and sewn with abrasion, cut and heat-resistant nylon thread Goatskin provides superior abrasion and tear resistance over cowhide or sheepskin, yet offers a comparable thickness for comfort and durability KEVLAR® construction provides cut resistance, heat, and flash protection SOG-700 contains 85% Nomex® and 15% Kevlar® blend Will not support flame or combust up to 800°F, (427°C) Elasticised wrist keeps the Operator™ taut, while the elasticised gauntlet keeps out foreign objects and prevents snagging Patented cut-ring stitching allows optional removal of the index finger for trigger control without unraveling the remaining edge Available in Black (SOG-600), Sage Green (SOG-650), Desert Tan (SOG-700), Foliage (SOG-750), and New Coyote (SOG-800)
Cheyenne plus 8011 Four-layer leather glove with membrane. The basic material is heat, water and abrasion resistant grain leather with special treatment that ensures maximum sensitivity and work comfort. There is reinforcement in the palm that considerably increases glove protection against mechanical effects. Finger joints are protected with special padded reinforcement. The glove has highly permeable Porelle® membrane that is water resistant and at the same time makes a barrier against bacteria, blood and chemicals. The next layer is composition of technical Kevlar® and Nomex® that incrases resistance against heat, abrasion and cutting. The hand is directly protected with the last layer - lining made from 100% Kevlar®. This material composition enables to use gloves in hard conditions and to keep excellent sensitivity at the same time. Knit wristband is made from Kevlar®. The gloves are tested and certified according to EN 659:2004 - Protection gloves for firefighters. Sizes: 6-7-8-9-10-11-12
Josephine II Four-layer textile glove with membrane in 2D style. The basic material of the back of the hand is Kermel®. The palm is made from Kevlar® with silicon layer that ensures resistance against heat, abrasion and cutting and provides maximum sensitivity and work comfort thanks to its flexibility. The next layer is composition of technical Kevlar® and Nomex® that incrases resistance against heat, abrasion and cutting. Gloves have water resistant membrane. Knit wristband is made from Kevlar®. The gloves are tested and certified according to EN 659:2003 - Protection gloves for firefighters. Size: 6-7-8-9-10-11-12
Browse FIREFIGHTER UNIFORM ACCESSORIES
Firefighter Uniform Accessories products updated recently
- Advanced’s Axis EN System Installed By Abhay Fire And Security Engineers At Inorbit Mall In Mumbai
- Triek-HT Adapts Allison Transmission’s Firefighting Trucks For National Airport And Fire Corps Customers
- Ramtech Electronics Secures Manchester Airport By Deploying WES3 Fire Alarm System And WES REACT App
- Advanced’s Lux Intelligent system and MxPro fire panels protect The Berkeley in Knightsbridge