Groupe Leader FIRE FOAM (2)
Browse FIRE FOAM
- Groupe Leader
- Other Groupe Leader products
- Groupe Leader Nozzles
Foam Equipment products updated recently
Specially designed for fire safety trainers, the LEADER range of fire training equipment can be used to organize particularly realistic and dynamic fire training. Any company firefighting policy would be incomplete without training on what to do in the event of a fire. For over 20-year, LEADER has designed and manufactured fire training equipment like flame generators which perfectly meets the training requirements of any company’s fire safety officers, whilst respecting the environment, health, and learner safety requirements. Leader is one of the forerunners in the design and manufacture of propane gas-supplied fire extinguisher trainers. A fire trainer/flame generator that allows for the reduction of the impact on the environment, whilst reproducing intense and realistic fires with a flame height of up to 3m. Training Modules To personalize training and familiarize learners with all fire situations, LEADER has designed training modules compatible with all fire trainers (also called flame generators). These modules can simulate specific situations such as: Computer screen fires Bin fires Power cabinet fires Motor fires Aerosol explosions LEADER fire training modules allows learners to: Recognize the type of fire (Class, A, B, C, D, or F fire) Select the correct extinguisher (spray water extinguisher, water + additive, powder, CO2, or foam) Use the correct technique to extinguish the fire (spraying extinguishing agent over the fire, covering the fire with a wet cloth, etc.) Equipment Range LEADER fire training equipment range perfectly meets the needs of fire training for any company staff In order to supplement the fire training equipment range, Leader, the well-known fire training equipment supplier, also offers different types of refillable extinguishes for fire extinguisher training; (auxiliary pressure extinguisher, permanent pressure extinguish, CO2 extinguisher). LEADER also supplies smoke generators able to create realistic smoke for safe evacuation exercises and training. The LEADER fire training equipment range perfectly meets the needs of fire training for any company staff while respecting the environment and health and safety requirements. Totally autonomous and supplied by a rechargeable 12v battery, the environmentally friendly flame simulator can be used for training without polluting or leaving residue on-site (ash, non-consumer hydrocarbons). There is no need to add wood, hydrocarbons, or other fuels to the fire. Specific Products Fire Trainer / Flame Generator Pyros 3 Pyros 3, the most powerful fire trainer in the range, produces very powerful flames (up to 3 meters high) and high thermal radiation for realistic and impressive training. For safe training, closer to the trainee, the fire trainer is equipped with a control panel and remote controls for perfect control of the fire (ignition, extinction, and flame height) and control of the gas supply. The water in the pan allows a homogenous distribution of the fire on all the surface of the pan giving it a strong thermal radiation with flames rising up to 3m high. PYROS 3, the largest flame generator in the range, has a very large fire surface area of 0.83m2. PYROS fire trainer is well-equipped to be able to carry out training with full safety: Two remote controls supplied for controlling the fire (ignition and extinction) at distance. A handy wireless remote control to accompany the trainee towards the fire, without cable and wired remote control. Integrated solenoid valve for automatic and immediate gas control Emergency stop button located on the console PYROS 3 fire trainer has been specifically designed for ease of use: Easy drainage ensured by handles for secure handling of the pan and wheels that allow the pan to be moved easily and titled effortlessly Storage space next to the igniter for the wired and wireless remote controls Storage space under the console to accommodate a bottle of gas PYROS 3 fire trainers is equipped with a control console: Lightweight and stable. Easy to transport: store in the pan during transport Control of flame height with 2 gas supply taps and 1 flow rate adjuster 1 pressure gauge for continuous gas pressure monitoring 1 emergency stop button Possible to connect 1 to 2 bottles of industrial-type propane gas or 4 bottles of domestic gas Fire Trainer / Flame Generator AEROS 2 The AEROS 2 fire trainer is the ideal compromise between the power of PYROS 3 and the compactness of GF42. With a fire surface area of 0.50m2, it generates flames of 1.50m high. Compact and lightweight, it is easily transportable. With a weight of 20.8 Kg, AEROS 2 fire trainer is easily transportable. The water in the pan allows a homogenous distribution of the fire on all the surface of the pan creating an impressive oil-slick fire effect with flames rising to 1.50m high. AEROS 2 is equipped with a wired remote control for controlling the fire (ignition and extinction) at distance. In addition, the fire trainer has an integrated solenoid valve for automatic and instantaneous gas control. AEROS 2 flame generator has been specially designed for ease of use: Easy drainage thanks to the flame generator tilting legs Increased ground contact surfaces areas, allowing it to be used on soft ground Fire Trainer / Flame Generator GF42 Compact, lightweight, the GF42 fire trainer is easy to carry in a vehicle. Water-free, it is simple and quick to set up. With a fire surface of 0.42m2, it generates flames with a maximum height of 1.20m. The GF42 is 63cm wide and 70cm long and weighs 14.3kg, allowing it to be easily transported and stored in a car boot. Fire training without water, the GF42 requires no preparation before use, no water filling necessary.
This February saw the launch of Emergency One (UK) Limited’s (E1) flagship new appliance, the E1 Scorpion™ The event, hosted by E1 and sister company, Clan Tools and Plant Limited, at their state-of-the-art specialist appliance manufacturing plant in Scotland, welcomed attendees from Fire and Rescue Services throughout the UK, as well as many from the airport and industrial FRS. E1 has been at the forefront of specialist vehicle design and manufacture in the UK for 30 years, and they are now the largest such company based in the UK. Many of their developments have become widely adopted and recognized as the industry standards. Through detailed engagement with the UK FRS’s, dedicated research and development, collaborative engineering, and a passion for innovation, the E1 Scorpion™ was born Innovate and Evolve While the E1 Scorpion™ concept is not new (water tower pumping appliances have been around for decades), the manufacturing and systems engineering and technology employed with this vehicle certainly are new. The E1 Engineering and Design Project Team were issued with the following simple design brief: Improve firefighter and public safety Robust and reliable engineering Full BS EN 1846 compliance / Full pumping appliance capability Full water tower capability / High flow rates / Optimize monitor performance Offer Choice – Full customization of build and chassis options Develop and improve existing technologies and solutions Simplify operation The resultant development of the E1 Scorpion™, therefore, required the creation of many new and innovative systems and componentry, as well as the refinement of many existing technologies – all of which were also on display at the Launch event. HRET System 20m High Reach Extendable Turret (HRET) system is installed featuring the Fire-Spike piercing lance system A 20m High Reach Extendable Turret (HRET) system is installed (designed and manufactured in England by E1 UK partner Translink International), featuring the “Fire-Spike” piercing lance system. The installation facilitates up to a 20m vertical reach and 14m horizontal reach, with full 360° rotation. Water and Foam delivery is available via the boom-mounted high flow monitor (up to 6,000lpm), or via the “Fire-Spike” (1,000lpm). CCTV and Thermal Imaging Cameras are also installed, with images relayed to locations such as the cab or pump bay system controls and/or the chest-pack remote control system. Fire Engineering Installation The impressive Fire Engineering installation feature a Godiva Prima P6A pump (6,000lpm), along with an (optional) Cobra Ultra High-Pressure abrasive/cutting system. The pump features a custom E1 designed manifold system, facilitating the high flow characteristics of the appliance. Full BS EN 1846 Pumping Appliance capability is upheld, with the appliance featuring a 6-person cab/crew cab, individual crew seats (c/w integrated BA), a 1,800-liter water tank, 100-liter foam tank, and a 1,200kg operational equipment inventory capacity. A unique (optional) pump bay canopy door provides safe shelter for the pump operator, who benefits from the latest widescreen version (“Evo”) of the industry-standard E1 “ePumpControl” HMI system. Design and Functions The rear body superstructure includes the all-new “E-1” Roller Shutter Door system, and “E-1 Streamline” smooth, flush-sided profile – with no overhanging door furniture (a narrower body and reduced accident damage potential). The E1 Technology arm of the business was on the show, with the E1 Scorpion featuring the latest iterations of their “e1fleet” specialist appliance telematics system, the “e1Tag” Radio Frequency Identification (RFID) on-appliance asset management system, and the “e1Connect” mobile Wi-Fi hotspot. To enhance the list of firefighting options available only from E1, the “E1 Nebula” system was also launched. The Ultra High-Pressure firefighting system (38lpm @ 200bar) includes several lance options, robust PTO drive (low maintenance, improved reliability, and performance), full integration with ePumpControl, and e1fleet, and options for foam and abrasive cutting upgrades. The system was demonstrated in its alternative, portable (self-contained) form. Other product launched Also unveiled was the E1 Scorpion’s™ big brother, the E1 Manticore™; a fully configurable industrial appliance, available on 18, 26 or 32 tons GVW Chassis Day/Crew Cab variants. Authority Comment E1 Scorpion™ showcases the best of British engineering, innovation, and manufacturing Mike Madsen, Managing Director, Emergency One (UK) Limited and Clan Tools & Plant Limited, commented; “We are delighted that the E1 Scorpion™ has been met with such enthusiasm. It’s important to me that we offer our customers choice – hence the E1 Scorpion is fully customizable and offers a unique, no-compromise build solution along with a comprehensive option list.” “The build quality and truly innovative design features are testaments to the quality, passion, drive, and commitment of our employees and the collaborative approach we adopted throughout the design and manufacture process. Working closely with our partners in Manchester, Translink International, I am proud that the E1 Scorpion™ showcases the best of British engineering, innovation, and manufacturing.” Finally, key supplier partners on the E1 Scorpion™ project were on hand to discuss and display their own products, along with many of the E1 and Clan Partner Companies, such as Magirus, Lukas, Vetter, Leader, and BioEx.
On the 22nd December 2010, a routine operation took a dramatic turn for firefighters in Chicago, Illinois. Two of them died and 14 others were seriously injured after the collapse of a burning building. For many years this peril has always faced Fire & Rescue teams and even since this accident many others have occurred around the world. To help prevent such accidents, there is a simple and effective solution that monitors the movements of a structure and alerts rescue teams of an imminent risk of collapse or danger. Designed by LEADER in collaboration with international experts in USAR and victim location techniques, LEADER Sentry provides additional safety in operational areas where teams or crews may be working, including rescue teams, firefighters, doctors, workers, and other persons or victims. Design and Features LEADER Sentry monitors the stability of buildings during firefighting operations With a simple program setting, the harmless laser ray of the LEADER Sentry monitors for the slightest movement in a structure or mass that may endanger people: unstable building, vehicle accident, landslide, rockfall, snow shift, or avalanche. Two LEADER Sentry laser sensors can be linked simultaneously to monitor two different structures or two axis of movement of the same structure. If the movement of the structure under surveillance exceeds the warning threshold chosen, a powerful siren and a flashing beacon are activated to warn of an impending collapse allowing rescuers to take refuge or evacuation measures. LEADER Sentry monitors the stability: of buildings during firefighting operations (fire damaged metal structures, wooden houses or other buildings, post-incident) during operations of USAR – Searching for victims (after a collapse or natural disaster) during the work/inspections within dangerous underground structures (Sewers, tunnels, mines….) during emergency shoring and securing trenches and structures (Trenches, shorings…) during securing of fragile structures (snow on the roof of houses or stadium….) or dangerously unstable masses (cliffs, archaeological excavations landslides of dangerous rocks, felled tree…) of wreckage during Rescue following Road traffic accidents, Railway derailments (lifting of damaged vehicles (trucks, train…) or of structures during operations of road rescue (movement or collapse of a bridge or a road structure) Strengths of the product Simple and intuitive One or two laser heads can be plugged into the same control box to be used simultaneously A laser beam with a range of 30 meters (100 feet) A 98 dB alarm and a red flashing beacon for immediate warnings of possible dangers Quick and easy programming Selectable adjustment by increments from 5 to 100 mm (0.2” to 4”) to determine the acceptable maximum threshold of movement depending on the structure and context A clear display showing movement in real-time with the choice of measurement (meters or inches) Possibility of multi-source power to be operational in all situations Automatic switchover to AA batteries back up if the main power source fails A telescopic sight enabling precise pinpointing of the laser on the targeted area
Carbon Monoxide: Creeping Killer Caught In The ActDownload
Firefighters And Asbestos ExposureDownload
Flame-Resistant Fibers Combine Protection and Comfort for FirefightersDownload
Overcoming the Challenges of Fire Safety in the Paper IndustryDownload