Tornado RC Monitor. Very compact though with large 2.25" waterway making it the ideal bumper turret. Waterway with turning vane has only 19 psi friction loss at 500 gpm. Maximum operating pressure is 200 psi. Elevation range is 90 degrees above horizontal to 45 degrees below. Field changeable elevation travel stops at 45 degrees above and 20 degrees below horizontal. Horizontal travel is 370 degrees (185 degrees either side of a center position). Field changeable horizontal travel stops to give 180 degrees (90 degrees either side of a center position). Designed for field changeable 12 VDC or 24 VDC operation. Comes with factory installed motor control circuits to control horizontal rotation, elevation, and nozzle pattern. Main waterway made from hardcoat anodized ANSI 356-T6 aluminum. Silver powdercoat finish inside and out. Available with Quick Connect inlet for 2.5 ANSI flange and 2" female taper pipe thread. Quick connect inlet allows for quick removal of the Tornado without the use of tools for installations such as bumper mounting where the monitor must be removed to tilt the cab of the truck.