Fire Lite Alarms (Honeywell) Fire Detection

Fire Lite Alarms (Honeywell) 2151 photoelectric smoke detector contains a unique optical sensing chamber designed to sense the presence of smoke particles produced by a wide range of combustion sources. A custom integrated circuit incorporates signal processing to help reduce false alarms.

Fire Lite Alarms (Honeywell) 5601 mechanical heat detector offers a low-cost option for property protection against fire and for non-life safety installations, where smoke detectors are inappropriate. The detector is a single circuit model with fixed-temperature/rate-of-rise activation. It provides clear markings on the exterior of the unit to ensure that proper detector is being used. Once the detector has been activated, the collector drops from the unit to allow easy identification of the specific unit in alarm.

Fire Lite Alarms (Honeywell) MS-25 is a addressable fire alarm control panel (FACP) with built-in digital alarm communicator transmitter (DACT). The control panel supports up to 25 addressable devices in any combination of detectors and modules. With simple programming, operation on standard wire, and features such as drift compensation and maintenance alert, MS-25 is a preferred alternative to conventional control panels in both new and retrofit applications.

Fire Lite Alarms (Honeywell) SD355A addressable, lowprofile plug-in smoke detector with ULC listing uses a state-of-the-art photoelectric sensing chamber with communications to provide open area protection. Since the detector is  addressable, it helps emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication.

Fire Lite Alarms (Honeywell) D355PL(A) photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct.

Fire Lite Alarms (Honeywell) CMP-2401B is a one-zone, Class B conventional fire alarm control panel. The MiniPanel meets a variety of low-end commercial, industrial, and institutional applications. The panel features contro switches for Reset, Trouble Silence, and Signal Silence; and LED indicating lamps.

Fire Lite Alarms (Honeywell) C4WT-BA is a four-wire photoelectric smoke detector with fixed thermal sensor and ULC listing. It offers a number of intelligent features to simplify testing and maintenance. The detector provides wide-angle red and green LED indicators for instant inspection of detector condition. The LEDs indicate: normal standby, out-of-sensitivity, alarm, or freeze trouble conditions.

Fire Lite Alarms (Honeywell) MS-9200UDLS is a combination FACP (fire alarm control panel) and DACT (digital alarm communicator/transmitter) all on one circuit board. The MS-9200UDLS includes 80-character LCD display, singleprinted circuit board mounted on chassis, and cabinet. 120 V AC operation.

Fire Lite Alarms (Honeywell) HFS-P(A) is a photoelectric smoke detector. The detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. A maintenance alert trouble will be reported if sensitivity drifts outside the listed range. The detector also provides point location for alarm communication and selective maintenance. It is ideal for small commercial spaces.

Fire Lite Alarms (Honeywell) C4W-BA is a four-wire photoelectric smoke detector with ULC listing. It offers a number of intelligent features to simplify testing and maintenance. The detector provides wide-angle red and green LED indicators for instant inspection of detector condition. The LEDs indicate: normal standby, out-of-sensitivity, alarm, or freeze trouble conditions.

Fire Lite Alarms (Honeywell) 1151 ionization smoke detector contains a unique single-source dual-chamber design which will sense the presence of smoke particles produced by fast combustion as well as slow smoldering fires. This chamber exhibits increased stability, significantly reduces nuisance alarms, and provides better performance at higher velocities.

Fire Lite Alarms (Honeywell) MS-2 is a 2 zone conventional fire alarm control panel. The MS-2 is compatible with with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices.

Fire Lite Alarms (Honeywell) C2W-BA is a two-wire photoelectric smoke detector with ULC Listing. It offers a number of intelligent features to simplify testing and maintenance. The detector provides wide-angle red and green LED indicators for instant inspection of detector condition. The LEDs indicate: normal standby, out-of-sensitivity, alarm, or freeze trouble conditions.

Fire Lite Alarms (Honeywell) D4120 is a 4-wire photo electric low-flow duct smoke detector. The detector features a pivoting housing that fits various applications: both square and rectangular footprints mount to round or rectangular duct work. The detector has signals to indicate trouble and maintenance conditions. Additionally, a cover tamper feature is incorporated to indicate a trouble condition when the sensor cover is removed or improperly installed.

Fire Lite Alarms (Honeywell) BEAM1224 is a four-wire conventional beam smoke detector. The detector is suited for protecting open areas with high ceilings where spot-type smoke detectors are difficult to install and maintain. The BEAM1224 is a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector, it causes a reduction in the signal strength. When the smoke level (signal strength) reaches the predetermined threshold, an alarm is activated.

Fire Lite Alarms (Honeywell) CP355 addressable, low-profile, plug-in ionization detector uses a state-of-the-art ionization sensing chamber to provide open-area protection. The ionization detector is used to sense products-of-combustion and report the measured level of such products to the fire alarm control panel. The detector helps help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication.

Fire Lite Alarms (Honeywell) MS-9600LS(E) is a compact, cost effective, intelligent addressable FACP (fire alarm control panel). The combination of Fire Lite’s newer series devices and legacy 300 Series devices, along with the MS-9600LS(E) FACP, offer the latest in fire protection technology. The control panel includes 80-character LCD display, single printed circuit board, and cabinet.

Fire Lite Alarms (Honeywell) MS-9050UD(E) is a fire alarm control panel (FACP) and digital alarm communicator/transmitter (DACT) combined into one circuit board. The compact, intelligent addressable control panel supports up to 50 addressable devices of any type of detectors and modules.

Fire Lite Alarms (Honeywell) 2W-B is a two-wire photoelectric smoke detector. It offers a number of intelligent features to simplify testing and maintenance. The detector provides wide-angle red and green LED indicators for instant inspection of detector condition. The LEDs indicate: normal standby, out-of-sensitivity, alarm, or freeze trouble conditions.

Fire Lite Alarms (Honeywell) MS-9600UDLS(E) is a compact, cost effective, intelligent addressable FACP (fire alarm control panel). The combination of Fire Lite’s newer series devices and legacy 300 Series devices, along with the MS-9600UDLS(E) FACP, offer the latest in fire protection technology. The control panel includes DACT-UD2, 80-character LCD display, single printed circuit board, and cabinet.

Fire Lite Alarms (Honeywell) SD355RA is a remote test capable lowprofile plug-in smoke detector with ULC listing. It uses a state-of-the-art photoelectric sensing chamber with communications to provide open area protection. Since the detector is  addressable, it helps emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication.

Fire Lite Alarms (Honeywell) MS-4 is a 4 zone conventional fire alarm control panel. The MS-4 is compatible with with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices.

Fire Lite Alarms (Honeywell) MRP-2002 is a six-zone fire alarm control panel for single and dual hazard agent releasing applications. The MRP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.

Fire Lite Alarms (Honeywell) SD355 addressable, lowprofile plug-in smoke detector uses a state-of-the-art photoelectric sensing chamber with communications to provide open area protection. Since the detector is  addressable, it helps emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication.