CET Fire Pumps Passive Fire Protection (PFP)

High pressure Honda powered pump that goes up to 200 psi (14 bar). Engine and pump are mounted on a protective frame made of steel with shock absorber and folding handles.  Engine specifications:  Honda 11hp at 3600 RPM, air cooled engine Single cylinder gasoline engine 12V electric start with recoil start as backup 6 quarts (6.5 l) integrated fuel tank  Pump unit specifications: Transmission drive C.E.T. single centrifugal pump Pump body made from resistant aluminum alloy Bronze impeller Mechanical shaft seal Stainless steel pump shaft Belt drive transmission Exhaust priming system, guaranteed up to 15' (4.5 meters) lift One 1 1/2" (38 mm) delivery outlet with 1/4-turn ball valve One 2 1/2" (65 mm) suction inlet Dimensions: Length: 24" (609 mm) Width: 26 3/4" (679 mm) Height: 23 7/8" (606 mm) Weight: 160 lbs (73 kg)  Accessories: 36 watts alternator Pressure gauge Low oil alert 12 volt battery

This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a chassis made of profile steel with shock absorbers and heavy duty carrying handles

This pump model is the smallest and lightest pump of our line up. It's very easy to carry around and will insure that you can access any remote location. Now that's meeting your requirement!

This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a skid chassis.

This pressure/volume pump is the most suitable for drop-in units. The engine and pump are mounted on a steel protective frame with folding handles

This pump is the ideal tool to fill your fire apparatus, supply your apparatus or carry water over a long distance

The Goliath model is a compact pump that delivers amazing pressure performance so as to meet the needs of several applications.

This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a chassis made of profile steel with shock absorbers and heavy duty carrying handles.

The HP80 model is a compact pump that delivers amazing pressure and flow rate performance so as to meet the needs of several applications

Engine and pump are mounted on a protective frame made of steel with shock absorbers and folding handles. The MID-RANGE HONDA is the most specified pump for use on skid units.

High pressure Honda powered pump that goes up to 200 psi (14 bar). Engine and pump are mounted on a protective frame made of steel with shock absorber and folding handles.  Engine specifications:  Honda 11hp at 3600 RPM, air cooled engine Single cylinder gasoline engine 6 quarts (6.5 l) integrated fuel tank  Pump unit specifications: Transmission drive C.E.T. single centrifugal pump Pump body made from resistant aluminum alloy Bronze impeller Mechanical shaft seal Stainless steel pump shaft Belt drive transmission Exhaust priming system, guaranteed up to 15' (4.5 meters) lift. One 1 1/2" (38 mm) delivery outlet with 1/4-turn ball valve One 2 1/2" (65 mm) suction inlet Dimensions: Length: 24" (609 mm) Width: 26 3/4" (679 mm) Height: 23 7/8" (606 mm) Weight: 160 lbs (73 kg)  Notes:  Model has manual start only (does not come with battery) the weight is 150 lbs. (65 kg). Accessories: 36 watts alternator Pressure gauge Low oil alert 12 volt battery

This pressure/volume pump is the most suitable for drop-in units. The engine and pump are mounted on skid frame. The skid version is easily mountable on vehicles and trailers

The MR version gives you more pressure to meet the requirements of an initial attack

This pump is the ideal tool to fill your fire truck, supply your pump truck or carry water over a long distance.

Honda pump with a single discharge. Engine and pump are mounted on a protective frame. Engine specifications: Honda 18hp at 3600 RPM, air cooled engine. V-Twin cylinder, gasoline engine 12V electric start with recoil start as backup. 6 galons (22 l) detachable fuel tank. The fuel tank is made from plastic. Pump unit specifications: Direct drive C.E.T. single centrifugal pump. Pump body made from resistant aluminum alloy. Bronze impeller. Mechanical shaft seal. Exhaust priming system, guaranteed up to 20' (6 meters) lift. Two 2 1/2" (65 mm) delivery outlet with 1/4-turn ball valve. One 4" (100 mm) suction inlet. Dimensions: Length: 25 5/8" (650 mm) Width: 20 1/4" (514 mm) Height: 22 1/8" (561 mm). Weight: 190 lbs. (86 kg). Accessories: Swivel spotlight. 36 watts alternator. Pressure gauge. Low oil alert. 12 volt battery.

The Goliath model is a compact pump that delivers amazing pressure performance so as to meet the needs of several applications.

The MR version gives you more pressure to meet the requirements of an initial attack.

This high volume Honda powered floating pump is the most efficient on the market. It gives you the highest volume in its range.

Portable fire pump 26hp-DSL-MR: 6 gal. (22 l) capacity fuel tank. Electric priming system guaranteed up to 20' (6 m) lift. Single delivery outlet 1 ½¨ (38 mm). One suction inlet 2 ½¨ (65 mm). Dimensions: 32" (812 mm) x 24" (610 mm) x 27" (686 mm). Weight: 265 lb (120 kg) approx. Pump body made from seawater resistant aluminum alloy.

This high pressure/high volume pump is made to fight fires or supply water to the fire scene. The engine and pump are mounted on a steel protective frame with folding handles

The MR version gives you more pressure to meet the requirements of an initial attack

This pressure/volume pump is the most suitable for drop-in units. The engine and pump are mounted on skid frame. The skid version is easily mountable on vehicles and trailers

This pump is the ideal tool to fill your fire truck, supply your pump truck or carry water over a long distance.

This pump is the ideal tool to fill your fire truck, supply your pump truck or carry water over a long distance.

This high pressure/high volume pump is made to fight fire or supply water to the fire scene. Engine and pump are mounted on a chassis made of profile steel with shock absorbers and 4 heavy duty carrying handles. Pump body made from resistant aluminum alloy. Impeller made from bronze. Mechanical shaft seal. Stainless steel pump shaft. Electric priming system guaranteed 20' (6 m) lift. Two 2 1/2" (65 mm) delivery outlets. One 4" (100 mm) suction inlet. Dimensions: 40.25" x 23.5" x 27". Weight: 295 lb. (134 kg).

This pressure/volume pump is the most suitable for drop-in units. The engine and pump are mounted on a steel protective frame with folding handles.

This high pressure/high volume pump is made to fight fires or supply water to the fire scene. The engine and pump are mounted on a steel protective frame with folding handles.

6 gal. (22 l) detachable fuel tank. Exhaust priming system, guaranteed up to 20’ lift. Two 2 ½¨ delivery outlet with ¼-turn ball valve. One 4¨ suction inlet. Dimensions : 37¨ L x 26¨ W x 31¨ H. Weight : 275 lbs. Engine specifications: Kohler developing 38hp at 3600 RPM, air cooled engine V-Twin cylinder gasoline engine 12V electric start Pump unit specifications: Direct drive C.E.T. dual stage centrifugal pump. Pump body made from seawater resistant aluminum alloy Bronze impeller Mechanical shaft seal Notes: Two (2) years warranty Accessories: Swivel spotlight 180 watts alternator 1 x delivery pressure gauge 12 volt battery