Honeywell First Responder Products Fire Protection Suits  (4)

The importance of firefighter health has received increased media attention in recent times, and rightly so. Following Covid-19 more emphasis is now being placed on hygiene and disinfection, which I believe will be one positive outcome of this pandemic.  A significant cultural change has been a long time coming to take us away from firefighters wearing dirty kit as a badge of honor that proves their hard work and value, to understanding that clean and well maintained kit supported by detailed and robust hygiene processes that mitigate every contact with contaminants are essential.   Firefighters’ exposure to carcinogens Prior to Covid-19, the media were also reporting more regularly on the very real issue of firefighters’ exposure to carcinogens, an issue when embedded in equipment and absorbed.  Cancer has been highlighted in some scientific reports to be the leading cause of death among firefighters, with the International Association of Firefighters (IAFF) reporting that cancer caused nearly two out of three (61%) firefighter line-of-duty deaths between 2002 and 2017. The National Institute for Occupational Health and Safety (NIOSH) also found that in the US, firefighters had a 14 percent higher chance of dying of cancer compared to the general population. The results of these reports need to be underpinned by robust medical research to reflect the landscape, culture, current standards and operational practices for Fire Services in the UK.    Cancer caused nearly two out of three (61%) firefighter line-of-duty deaths between 2002 and 2017 While these shocking statistics are relatively well known, not enough has been done to force a change. Manufacturers of medical and safety technology products have a responsibility to innovate solutions that support change. To this end, Dräger’s Health for the Firefighter campaign complements our training programmes and communicates the importance of detailed hygiene processes; from the handling and storage of masks and breathing apparatus equipment through to the subsequent cleaning of the kit after an incident has occurred. Training is the first and crucial step in guiding a cultural shift, and ultimately protecting the health and well-being of our firefighters.   Using technology, research and innovation It’s important that training programmes reflect the fact that fire services are the experts – they have the experience and understand what solutions are practical. It is therefore our role to use technology, research and innovation to ensure we work together as partners with applied training helping to create a robust consistency in approach as well as providing a safe environment to train.  Dräger’s training is typically split into three areas:   Training systems - these encompass mobile or fixed training facilities that enable state-of-the-art training so firefighters can experience real fires or extrication scenarios in a safe environment including compartment fire behavior training (CFBT). At Dräger they include a vast portfolio of potential fire and rescue environments, including petrochemical plants, hospitals, schools, high-rise buildings, vehicles, aircraft and subway stations; Technical training - providing comprehensive know-how on the maintenance and repair of equipment – from mechanical and electronic components through to cleaning and disinfection;   Fitness training – providing equipment to help ensure that firefighters are prepared for the physical challenges that come with the job and can be tested and monitored to improve their safety.  The science and behavior of a fire and its contaminants Training has come a long way from when it centred simply around exposure to hot temperatures often referred to as ‘burn to learn’. It is now about much more than protecting a firefighter from becoming burnt, but rather teaching the science and behavior of a fire and its contaminants, not only to support fire and rescue operations, but also to protect the firefighter’s own health.  While Covid-19 is driving improvements in this regard, what is more difficult is helping fire services to realize that technical training on the cleaning and hygiene processes related to kit is just as important to firefighter health.   Consistent and robust hygiene processes are also about technology. While manual cleaning of equipment is still generally the norm, there are many fire services that are moving towards mechanical washing systems, which provide complete consistency in washing temperatures, the amount of detergent used, speed and temperature of drying – which can all work together to disinfect contaminants and to protect the longevity of the kit.   Training and support around these systems encompasses the entire purchasing and use life cycle; from helping to build business cases for procurement and logistical installation support, to advice on the exact processes a firefighter should take when leaving a scene and returning to the station. Support also encompasses the ongoing maintenance of equipment and the quantity of stock required.  An international look at hygiene and infection control Consistent and robust hygiene processes are also about technology Despite such advances, the UK is still behind other countries in terms of our hygiene and infection control practices. Netherlands and Sweden, for example, are two European countries leading the way in shifting the mindset and using mechanical washing equipment supported by improved logistics for managing and tracking PPE and RPE more widely. For these countries, stringent hygiene practices are commonplace and are not just about fighting cancer or the current pandemic, but also about protecting firefighters and support staff from more day-to-day illnesses such as flu, common colds, cold sores and other communicable illnesses.   Within Dräger, my role includes advising on these best-practice examples and new equipment technologies – working with our UK-based manufacturing facility and R&D departments to ensure they are designed with the firefighter in mind, and working with Fire Services, Government and other key stakeholders to help drive improvements to further protect our crews. Having manufactured advanced technology solutions for the Fire Services for more than 115 years, Dräger has the experience and technological know-how to support this necessary change in how we think about equipment, its cleaning, and ultimately how to apply technology and training to make our firefighters safer. 

Firefighting is hot, hazardous, and let's face it, grueling work. But believe it or not, the job today has become even more challenging as firefighters must deal with increased heat loads, toxic substances and other physical challenges that make structural firefighting one of the most demanding professions on the planet. So, needless to say, being well-trained, physically fit, and safely equipped can make all the difference in the world. Evolving Technology The fact is, as heat loads and toxicity exposure risks increase due to modern synthetic construction, the ways in which fires are fought are changing as well. These shifts, combined with the revolution that’s taking place in firefighter protection technology, have led to new and exciting designs in firefighter personal protective equipment (PPE) offerings. Technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits Take the tried and true SCBA for instance. Since the invention of the first breathing apparatus in the late 1910s, their primary function has been air delivery. But today, technology is providing firefighters with respiratory protection “systems” is which respiratory protection itself is just one of many benefits. Revolution Of Life-Changing Technology Consider this: the effects of technology today impact virtually every aspect of modern life. And the same is true for the fire service, as software, thermal imaging, and wireless communications capabilities become more mainstream on the fireground. In response to these new capabilities, the consensus organizations responsible for PPE performance standards (i.e. NFPA and EN) have increased standards by mandating certain electronic components for each firefighter. But performance of these components can be limited by the fact that only so many “parts” can be attached to an SCBA, or because some capabilities are simply out of reach from a budget perspective. Over time, these limitations create long-term implications when it comes to SCBA choice, because the breathing apparatus purchased today may have to be in use for the next 15 years or more. So, what are firefighters to do? Firefighters should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future It’s More Than Air Delivery Missed opportunities for more timely safety improvements – which keep up with the pace of technology – are rooted in a false assumption that all SCBA are comprised of separate, mechanical components – and that the SCBA function is only about respiratory protection. But air-delivery is not the issue because every SCBA meets the standards, and every SCBA delivers air well. Further, looking at the SCBA merely as a separate component for air diminishes its potential to serve as a revolutionary safety technology “platform.” Safety As A System Firefighters need more than the minimum performance from breathing apparatus To keep pace with the rapid improvements in firefighter safety, firefighters need more than the minimum performance from breathing apparatus. Instead, they should view their SCBA as the “foundation” of a safety system that equips firefighters with the many new safety capabilities that technology offers—now and in the future. I’m talking specifically about platform-type products that can be easily updated with the latest technology, as soon as it becomes available, to help protect them when their lives are on the line. Key Questions To Consider When Looking For An SCBA Include: Does the SCBA have features that allow you to see, hear, and react quickly to changing situations? Can the SCBA sizing be customized to best fit each firefighter? How many total batteries are needed for the SCBA, and how does that affect long-term costs? How well does it integrate with other systems, such as communication devices, portable instruments, etc.? Does the SCBA provide you, your team, and incident command with critical information to make effective, life-saving decisions? Can the SCBA be programmed to meet your standard operating procedures, such as audible and visual alarms at 50% remaining pressure? Is the facepiece reducing or adding to overall SCBA cost and complexity? How easily can the SCBA be updated to meet changing standards? How easily can integrated accessories or features, such as thermal imaging, be added as they are developed in the future? At MSA, we develop technologically-advanced safety equipment designed to help meet today's changing fireground dynamics. We’re committed to setting the pace for safety with continuous improvements and innovations in PPE. For today. For tomorrow. For the future.

Having the proper fire safety and chemical-protective equipment is imperative where risk of hazardous chemical exposure is great With businesses still facing the effects of the economic crisis with budget cuts, safety remains a key concern when it comes to finding cost-effective solutions without compromising public safety. One type of incident which many businesses are not properly equipped for is hazardous chemical exposure. Ian Hutcheson of Saint-Gobain Performance Plastics highlights the importance of having the proper personal protective equipment (PPE) necessary for chemical protection and states that such preventative measures can be achieved, even with budget restrictions. While the full-scale media hype about the "Global Financial Crisis" may be behind us, the follow on effects, such as continued tight budgets and reductions in government spending, are here to stay for the foreseeable future. The UK Government recently announced a major spending review with the aim of saving £83 billion over four years. As part of this, 192 QUANGOs will be abolished including Firebuy, the professional buying organisation for the Fire and Rescue Services. This focus on decreased spending means that now, more than ever, departmental budgets are being stretched and every purchase highly scrutinised to ensure the best possible cost efficiencies are achieved. But it is essential that a reduction in spending does not negatively affect public safety. Challenges for Fire and Rescue Services in responding to hazardous chemical exposure Recently, the UK's Audit Commission released a report entitled Business Continuity in the Fire and Rescue Services which investigated the plans the Services currently have in place to ensure that public safety can be upheld during short- and long- term disruptions (such as those caused by transport problems or adverse weather). Overall, the report found that many fire and rescue services have good business continuity management plans, but they cannot cope with every situation indefinitely. Fortunately, chemical incidents are infrequent but it is paramount that public safety is given priority and maintaining a robust, compliant arsenal of chemical-resistant personal protective equipment is essential to being readily equipped for an emergency situation.One area of particular concern was that, during these periods of disruption, less than a third of all Fire and Rescue Services could guarantee the availability of the sophisticated fire safety equipment needed in cases of hazardous chemical exposure.Advances are being made in the development of chemical-protective equipment Chemical protective suits reflect advancements in PPE There is, however, some good news for both the concerned public and those with stretched departmental budgets: advances are being made in the development of chemical-protective equipment that both improve quality and decrease total costs. This means that more Fire and Rescue Services will be able to fit equipment essential to chemical protection into their tight budgets. One such advancement is the availability of limited-life chemical-protective suits. These suits meet safety standards and fit the same application areas as their reusable counterparts, but offer both a smaller upfront purchase price and reduced total cost of ownership. These lower costs are achieved through minimal recertification, inspection, maintenance and storage expenses. Hopefully, decision makers will embrace the advances in chemical-protective equipment to ensure our fire services are readily equipped for all emergency situations. Ian Hutcheson - Saint-Gobain Performance Plastics

North America’s largest fire event, FDIC International, brings together more than 34,000 fire industry professionals this month (April 8-13) at the Indiana Convention Center and Lucas Oil Stadium in Indianapolis. First constructed in 1928, FDIC continues today in its original tradition of providing a forum for networking about the most vexing issues and sharing the most promising solutions to concerns that face the fire service. FDIC provides opportunities to learn new techniques, train alongside world-class leaders, and advance discussions among the most influential firefighters in the industry. FDIC allows practitioners and those who support the industry an opportunity to discuss frankly the latest developments in equipment and support and collaborate on how those new advancements can be best used. 27 Interactive H.O.T Sessions FDIC offers many opportunities for learning and training, starting with its 27 interactive Hands-on Training (H.O.T) sessions“FDIC is steadfastly dedicated to its fundamental principle of providing a non-ideological, non-affiliated and openly inclusive environment for sharing and collaborating among all members interested in the mission of the fire service,” says Chief Bobby Halton, Editorial Director, Clarion Fire Rescue Group, and Educational Director, FDIC International. “Whether their interests lie in operations, medical or fire, in administration, in the production and distribution of equipment, or the advancement of codes and standards, all opinions and worldviews are accepted and debated with the utmost respect and dignity.” FDIC offers many opportunities for learning and training, starting with its 27 interactive Hands-on Training (H.O.T) sessions, 78 pre-conference workshops and more than 200 conference sessions. FDIC’s immersive learning experience extends to the exhibit hall floor and outdoor demonstration area where attendees can see and try the latest products, equipment, services and technology from over 800 exhibiting companies. “FDIC is more important than ever to the fire service industry because it is now and will always be of the firefighters, for the firefighters, and about the firefighters,” says Halton. Events Co-Located With FDIC New this year, iWomen is co-locating their event at FDIC, which includes 14 timely classroom sessions spread over two days, as well as networking events geared at sharing challenges and insights in a supportive environment. Also, the Institution of Fire Engineers United States of America Branch is co-locating their AGM annual meeting and educational update at FDIC. And the National Fire Heritage Center has partnered with FDIC to promote the center, conduct its annual meeting and introduce the annual inductees into the Hall of Legends.  FDIC is more important than ever to the fire service industry because it is now and will always be of the firefighters, for the firefighters, and about the firefighters FDIC’s new MATCH! Program is a customized meeting experience that connects attending decision makers, who have an immediacy to purchase, with exhibitors whose products or services match their sourcing needs and interests. These VIP attendees can make the most efficient use of their time by accessing innovative matchmaking technology and a personal program manager to assist them with meeting scheduling and recommendations. Exhibitors At The Event FDIC’s Mobile App is a visitor’s guide to searching the exhibitor list, navigating the exhibit hall and seeing a full schedule of sessions and events. FDIC’s new parking partner, Gate Ten Events and Parking, allows visitors to reserve their parking space ahead of time. Large exhibitors headlining the Exhibit Hall include Pierce; Rev Fire Group, E-ONE, KME, Ferrara and REV Ambulance; 3M Scott Fire and Safety; and HME Ahrens-Fox. Other large exhibitors include Honeywell First Responder Products, Drager, Globe by MSA, Rosenbauer and Spartan Motors. Here are some of the timely themes covered at this year’s conference: Current updates on the development and implementation of science-based strategy and tactics Information and practices on mental health and wellness Leading advances in firefighting technology and managing an integration of technology into the decision-making process during operations Review of recent sentinel events in the fire service from actual participants Analysis of accident investigation from members of NIOSH and the CDC Updates on current research into toxicity in the environment and equipment Current thoughts on decontamination procedures presented by researchers and practitioners The value of belongingness as a tool for health and wellness, suicide prevention, a detailed examination of the sociotechnical interface and firefighting’s role going forward The complex political and operational dilemmas faced in the wildland urban interface Recruitment and retention for the volunteer fire service Networking Opportunities Abound The event takes over the city, and there are chances to network with peers everywhere they turnAt FDIC, networking starts the moment attendees arrive in town. The event takes over the city, and there are chances to network with peers everywhere they turn. Formal networking events are also organized, including the 9/11 Memorial Stair Climb, Courage and Valor 5K Fun Run, Comedy vs. Cancer, IFD Open House and Pumper Pull, Stop Drop Rock ‘n’ Roll and more.  “We want individuals to walk away feeling inspired by new ideas, tools or techniques they’ve learned in sessions or new products or services they’ve sourced on the show floor that ultimately keep them and their communities safe,” says Halton.

Honeywell TITAN SCBA facilitates easier and faster rescue of downed firefighters Honeywell has announced that its flagship Honeywell TITAN firefighter breathing equipment has been improved with a louder alarm to make it easier to find downed firefighters. Self-contained breathing apparatus (SCBA) As part of their standard turnout gear, firefighters wear an air cylinder with a respirator and facepiece known as self-contained breathing apparatus (SCBA). This equipment includes an alarm system that sounds when a firefighter goes down or is motionless to alert others they need help. Honeywell's enhanced alarm now sounds at a higher volume and with a different sound pattern in order to be heard over background noise at the scene of a fire and from a longer distance. The alarm meets new requirements from the National Fire Protection Association (NFPA). "An SCBA is a critical part of firefighter's safety gear on the fire ground, and the improved alarm will do a better job of sounding an alert if they become incapacitated or motionless," said Lynn Feiner, product marketing manager for Honeywell First Responder products. "Honeywell is committed to investing in new solutions, including connected technologies that advance safety, so firefighters can focus their energy on attacking the fire knowing their equipment has the most advanced technology." Honeywell TITAN SCBA Honeywell TITAN is the only SCBA to offer dual-motion sensors Honeywell TITAN is the only SCBA to offer dual-motion sensors - one on the firefighter's front alarm system and a second on the firefighter's back alarm system. This dual-sensing feature helps eliminate false alarms because it is better able than a single motion sensor to detect even subtle motions of a firefighter. All new Honeywell TITAN SCBAs shipped after Dec. 21, 2016, include the improved alarm system. Fire departments seeking to upgrade their 2007 and 2013 edition TITAN equipment to the newer standard should contact their Honeywell-authorised service center or a Honeywell trained technician for more information. Honeywell is an industry leader in firefighter turnout gear, supplying more than 80 percent of North America's largest 20 metropolitan areas with turnout gear and emergency response apparel. Honeywell First Responder is part of Honeywell Industrial Safety, which provides comprehensive solutions to help organisations manage workplace safety, including personal protection gear for a worker's eyes, ears, hands and head; respiratory protection; and toxic gas monitors. Honeywell Safety and Productivity Solutions Honeywell Safety and Productivity Solutions (SPS) provides products, software and connected solutions that improve productivity, workplace safety and asset performance for our customers across the globe. We deliver on this promise through industry-leading mobile devices, software, cloud technology and automation solutions, the broadest range of personal protective equipment and gas detection technology, and custom-engineered sensors, switches and controls. We also manufacture and sell a broad portfolio of footwear for work, play and outdoor activities, including XtraTuf and Muck Boot brand footwear. 

Honeywell’s latest firefighter gear, Life Guard Hood ensures firefighters’ safety Honeywell, global supplier of protective gear for firefighters and other emergency responders, has developed a new hood to better protect firefighters from the long-term health threats of hazardous substances produced when today's building materials burn. Honeywell Life Guard Hood Honeywell's new Life Guard Hood features an innovative design and fabrics that provide better blocking protection against hazardous particulates and toxins compared with traditional firefighter hoods. It also features a lighter, roomier fit that integrates with a firefighter's self-contained breathing apparatus (SCBA) and any other turnout gear. The hood was developed by Honeywell First Responder, whose products, ranging from helmets to boots to respiratory gear, is used by 80 percent of the 20 largest municipal fire departments in North America. Firefighting Gear "Fighting fires is dangerous enough, but the added risk posed by hazardous substances in smoke means we need to do more to protect the men and women who put their lives on the line every day," said Ken Schmidt, vice president and general manager of Honeywell First Responder, which provides head-to-toe protective gear for fire fighters and first responders. "Today, the most permeable piece of gear firefighters wear is their hood. We worked with fire chiefs and firefighters to develop our new Life Guard Hood, which blocks the particulates and toxins firefighters encounter in both air and water to help safeguard their long-term health." There were more than 500,000 structure fires in the United States in 2015, and new building materials make those fires even more dangerous to firefighters' long-term health. Modern synthetic products can release hazardous particulates, lethal gases and toxins when burned, and studies show that the skin and glands of the neck and face are especially prone to absorbing toxins. In addition, studies show that several types of cancer are occurring at higher rates among firefighters than the general population, according to the Firefighters Cancer Support Network, which provides education and support to first responders. Firefighters Safety Hoods such as Life Guard go a long way toward protecting responders better from airborne toxicants and particulates" "When training first responders around the country, we receive many questions about how firefighters can protect themselves better from the toxins that are present in fire smoke," said Jason Krusen, president of the Fire Smoke Coalition, which provides training to firefighters and first responders on the long-term health consequences of fire smoke. "Hoods such as Life Guard go a long way toward protecting responders better from airborne toxicants and particulates and reducing the long-term health risks." The particulate-blocking protection of the Honeywell Life Guard Hood is laboratory-proven and certified by the National Fire Protection Association. Honeywell Safety and Productivity Solutions Honeywell First Responder is part of Honeywell Safety and Productivity Solutions Group's Industrial Safety business, which provides comprehensive solutions to help organizations manage workplace safety, including personal protection gear for a worker's eyes, ears, hands and heads; respiratory protection; and toxic gas monitors. Honeywell Safety and Productivity Solutions (SPS) provides products, software and connected solutions that improve productivity, workplace safety and asset performance for our customers across the globe. We deliver on this promise through industry-leading mobile devices, software, cloud technology and automation solutions, the broadest range of personal protective equipment and gas detection technology, and custom-engineered sensors, switches and controls. We also manufacture and sell a broad portfolio of footwear for work, play and outdoor activities, including XtraTuf and Muck Boot brand footwear.