Students starting the new term at Stirling University will be able to take advantage of the biggest transformation the site has seen since the campus opened in the early 1970s. During the past 18 months, contractors have been hard at work completing the first two phases of a £38 million project to develop the highest quality student accommodation.

The three-year, three-stage development program, which will be fully completed in 2015, will see the creation of 788 contemporary bedrooms in four locations around the university’s main campus. This new accommodation will provide students with well-designed study bedrooms, spacious kitchens with dining space, increased social spaces and better connections to the surrounding landscape areas.

Fire detection and alarm system

A major part of the redevelopment was to provide the most suitable fire detection and alarm systemfor the entire site

A major part of the redevelopment was to provide the most suitable fire detection and alarm system (FD&A) for the entire site. The university had experienced a significant problem with false alarms in the past, recording more than 200 incidents annually.

The new FD&A system would have to not only provide the ultimate protection across the redeveloped properties but also help to alleviate the serious issue of on-going false alarms. An FD&A system provided by Gent by Honeywell was selected as the most efficient solution to address this critical problem.

S-Quad multi-sensor detectors      

Robert Abraham, Account Director, G4S Fire and Security System (UK), the company that is responsible for providing fire safety across the whole of the redeveloped site said, “We have worked with Gent products for over 20 years and recognize the benefits this specific solution can bring to a university setting.

He adds. “One of the outstanding advantages of the Gent system is its ability to detect real fires quickly. The S-Quad devices installed throughout the redeveloped campus incorporate the most advanced form of multi-sensor detection, which will overcome the significant number of unwanted false alarms.

Multi-sensor detection technology

The university also introduced a number of additional measures to reduce false alarms across the campus, installing a prefect hob timer in the kitchen area to automatically shut off power to the hob after thirty minutes.

Additionally, a Dorwatcher device has been installed which emits a piercing scream if the kitchen door is held open for more than one minute. These will help to alleviate any activations resulting from food being allowed to burn on the hob and the resulting smoke or steam leaving the kitchen through the wedged open door from activating the nearest smoke detector.

Smoke and fire detection

The team at G4S has been involved in the Stirling University project from its initial stages

G4S Fire and Security Systems is an Elite Technology Centre, the highest level of Approved Systems Integrators that form part of the Gent 24 Network. Gent awards the Approved Systems Integrators’ status to independent fire specialist companies who have been selected, trained and approved based on their extensive capabilities and considerable experience in the fire industry. The team at G4S has been involved in the Stirling University project from its initial stages, working closely with the developers Graham Construction and their nominated Electrical Contractor, Stothers M&E.

Robert Abraham said “We came to a commercial agreement with Stothers M&E, after being asked to cost a fire detection and alarm (FD&A) solution for each phase of the development. We chose the Gent product range because of its quality and reliability, its flexibility of programming and ultimately its ability to meet all of the requirements of the latest British Standards. We were also highly confident that the Gent technology would play a pivotal role in tackling the false alarms issue.

FD&A solution

The university currently has 2800 student bedrooms on and off campus and as part of the on-going project three properties were demolished, Murray Hall, Geddes Court and AK Davidson Hall, and brand new accommodation buildings are in the process of being constructed on the original Murray Hall and AK Davidson sites.

The FD&A solution was designed according to the specific uses of each room within the new buildings. In the student bedrooms, Gent’s renowned S-Quad multi sensors were installed, which are capable of detecting the products of combustion such as heat, smoke and carbon monoxide. The devices use patented dual optical scatter technology to enhance smoke detection, this allows it to be configured to filter specific risks such as steam and dust, resulting in significantly reduced false alarms.

Optical, dual optical, heat and CO sensing elements

The S-Quad’s inherent flexibility means it can be programmed to suit specific site applications. Different sensitivity states are set to incorporate combinations of optical, dual optical, heat and CO sensing elements. For instance, in the accommodation bedrooms S4-911-ST-VO units were installed utilizing carbon monoxide, dual optical smoke and heat detection technology in the same sensor to provide the optimum means of detecting a real fire while greatly reducing the risk of false alarms.

Robert Abraham continued “Gent provided the design team with an S-Quad detector selection tool. This allowed the design team to select not only the best device for each application but also the optimum state that each device should be set to during commissioning. Whether it is in a bedroom or kitchen, the optimum state can be selected and the system will be able to differentiate its response to real fires, and identify the culprits of regular false alarms such as steam or aerosol sprays.

Vigilon panels, smoke detectors and sensor sounder strobes

The entire FD&A system incorporates more than 6 Vigilon Panels, 24 loops and over 1600 devices in total

The entire FD&A system incorporates more than 6 Vigilon Panels, 24 loops and over 1600 devices in total, including a range of different panels, smoke detectors, call points, sounders, interfaces and the S-Quad range of sensor sounder strobes. The advanced sensing technology in the S-Quad devices will alert students using a highly visible visual alarm to ensure that all occupants are alerted to an emergency.

Robert Abraham concluded “The whole installation was a great success. The timescales were a challenge, which is inevitable in this type of environment, when students are set to move in. The deadlines had to be met, but the process went very smoothly.

Enhancing Campus security

Above all, the system is proving to be highly effective. The university has a system it can trust in and instances of false alarms have been dramatically reduced. On the rare occasions there has been a false alarm incident, there has been an explanation as to why the device was triggered.

The third phase of the Stirling University redevelopment was completed at the end of August with a further three phases planned and the whole project is on track for completion by spring 2015. Once fully completed, the project will help maintain the university’s enviable position as a place where student satisfaction and the all-round campus experience is very high. Students will be able to concentrate on their studies and socializing, safe in the knowledge that they are being protected by the most reliable, high performing FD&A solution, without the inconvenience of multiple false alarms.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

In A Busy Wildfire Season, Researchers Seek New Approaches
In A Busy Wildfire Season, Researchers Seek New Approaches

It makes perfect sense that a horrific wildfire season would come in the year 2020 on the heels of a pandemic. Dozens of major fires burned across North America in September, including 85 large uncontained fires and six contained fires across 12 states. Active fires have burned more than 3 million acres already, and 41,417 fires have burned almost 5 million acres year-to-date. The severity of the wildfire season is on track to surpass the 10-year average. Better understanding wildfires Global warming is often mentioned as a contributor to the wildfires, but there are other factors, too. Increasingly, researchers are looking to apply new approaches in address the risk of wildfires. They include tools such as deep learning and artificial intelligence (AI) to better understand wildfires and to control their intensity. The model could be used to reveal areas of greatest risk for wildfires A new deep learning model uses remote sensing and satellite data to trace fuel moisture levels across 12 Western states, in effect tracking the amount of easily burnable plant material and how dry it is. After additional testing is complete, the model could be used to reveal areas of greatest risk for wildfires and to plan the best areas for prescribed burns. Led by a Stanford University ecohydrologist, the research was published in the journal Remote Sensing of Environment. Recurrent neural network The model uses data from the U.S. Forest Service’s National Fuel Moisture Database, which amasses plant water content information from thousands of samples. Using a ‘recurrent neural network,’ the system leverages the fuel moisture data to corroborate measurements of visible light and microwave radar signals from spaceborne sensors that are tasked with estimating fuel moisture measurements. Newer satellites with longer wavelengths allow sensitive observations about moisture content deeper into the forest canopy. Estimates from the model are used to generate interactive maps that fire agencies may one day use to identify patterns and prioritize wildfire control estimates. Researchers are also working to analyze the impact of better and more efficient firefighting on the size and frequency of wildfires. The theory goes: When firefighters extinguish smaller vegetation fires, a consequence is the creation of an environment where wildfires are larger and/or more frequent. Natural cycle of regeneration Older woods will naturally catch fire from the sun’s heat to make way for fresh growth The theory is based on the premise that wildfires play an essential role in the periodic regeneration of forests. Older woods will naturally catch fire from the sun’s heat to make way for fresh growth. However, more efficient firefighting can disrupt the natural cycle and, along with global warming, aggravate the broader likelihood of larger and more frequent fires. Researchers at the WiFire Lab in California and the University of Alberta in Canada are using artificial intelligence (AI) to analyze the environment and provide recommendations for prescribed burns that can save some parts of the forest without interfering with the natural cycle of regeneration. Providing early warning of wildfires Equipment operated by Pacific Gas and Electric (PG&E) caused 2018’s Camp Fire, the most destructive wildfire in California history. Because of the threat of sparking a wildfire, PG&E this year shut off power to 172,000 customers in Northern California on Labor Day weekend, for example. A concern is the threat of winds tearing down power line or hurling debris into them. Southern California Edison (SCE), another utility, warned that about 55,000 customer accounts could lose power. California utilities SCE, PG&E and San Diego Gas and Electric are helping to fund a network of ALERTWildfire video cameras in California that will help to provide early warning of wildfires. Video cameras keep watch throughout five Western United States to provide early warning, and the number of cameras is growing fast.

Should Firefighters And First Responders Use Face Masks?
Should Firefighters And First Responders Use Face Masks?

Should firefighters and other first responders be exempt from requirements that they wear face masks to prevent spread of the novel coronavirus (COVID-19)? The City Council of Portsmouth, New Hampshire, seems to think so. They are proposing an amendment to exempt first responders from complying with the city’s face mask ordinance. Amendment to Exempt first responders from face mask rule Specifically, the proposed amendment states, “Exempted from the requirements of the ordinance requiring wearing of face coverings include law enforcement personnel, first responders or other workers, who are actively engaged in their tasks, if wearing a face covering may hinder their performance.” The Centers for Disease Control and Prevention (CDC) recommends that everyone wear masks in public settings The Centers for Disease Control and Prevention (CDC) recommends that everyone wear masks in public settings, especially when social distancing cannot be maintained. The CDC does not specify a need to exempt first responders. However, there is a possibility that a mask could interfere with the work of firefighters or first responders, especially when they are performing tasks that require physical exertion. Face masks can inhibit communication among first responders Face masks, covering the mouth and nose, could also inhibit communication by muffling sound and obstructing facial expressions. Obviously, communication is of paramount importance for firemen working as a team in an emergency, or when a first responder is seeking to give clear directions to the public. The issue of face masks has been inexorably entwined with the well-being of first responders, since the beginning of the COVID-19 pandemic. Early on during the infection spread, health officials dismissed face masks as a tool to avoid spread of the disease. They said that the masks were ineffective at preventing community spread and that, supplies of personal protective equipment (PPE) needed to be conserved for health professionals and first responders. Importance of face masks in controlling spread of COVID-19 However, the early advice was completely reversed in late March 2020 and masks have been advocated ever since. A mask, worn by an infected individual, reduces the dispersion of virus-laden droplets that spread the disease. Now, experts contend that any type of mask, including cloth or paper, can help to reduce spread of the COVID-19 virus. Expanding the use of masks to include those that are not conformant with the N-95 classification effectively eliminated any concerns about supply and helped to make the widespread use of masks the norm. To some extent, however, mask usage in the United States has been politicized and some see the requirements as an affront to liberty. Need for wearing face masks in public Masks are a useful preventative measure for firefighters working together in a communal area Fire and emergency departments face the same challenges as other businesses and institutions, as they seek to remain safe in a communal workspace. Masks are a useful preventative measure for firefighters working together in a communal area or when training or resting. Wearing masks in public also allows departments to model best practices and promote a positive perception of the department to the public. Disciplined use of face masks demonstrates unselfishness and respect for others. It communicates professionalism and concern for the greater good. Masks go a long way in saving lives of first responders Perception may also be an issue when it comes to the choice of masks, which become a de facto part of a uniform. Masks with political statements should be avoided, for example. Considering that dozens of American fire and EMS members have died of COVID-19 infection, since March 2020, the use of masks is another way that firefighters can work to save lives. However, sufficient flexibility is needed so that the use of masks does not interfere with other lifesaving duties.

What Are the New Trends in Firefighting Equipment?
What Are the New Trends in Firefighting Equipment?

Equipment is an important element in fighting fires, and in keeping firefighters safe. But what new needs are driving the development of equipment? How can equipment expand its role in fighting fires, or in managing building occupancy and traffic flow for that matter? We asked our Expert Panel Roundtable: What are the new trends and opportunities in firefighting equipment?

vfd