Download PDF version

Euralarm recently released a Position Paper on the EC proposal for a Regulation on Artificial Intelligence.

The Position Paper follows some informal discussions with DG CONNECT and contains proposals on several articles in the Regulation on Artificial Intelligence. Following the release of the Position, Paper Euralarm spoke to Gabriele Mazzini, lawyer of DG Connect, and in the lead for the proposal.

First-ever legal framework on AI

When asked to briefly explain the Regulation on Artificial Intelligence, also called the Artificial Intelligence Act, Gabriele Mazzini replied that the Artificial Intelligence Act is the result of a process of preparatory work that started in 2018 when a high-level expert group on artificial intelligence was appointed to provide advice to the Commission. 

The overall aim of the proposal is to make the rules for the development and use of AI consistent across the EU and thereby ensure legal certainty, encourage investment and innovation in AI, and build public trust that AI systems are used in ways that respect fundamental rights and European values.

The proposal aims to make the rules for the development and use of AI consistent across the EU

In 2020 the Commission adopted a White Paper that was sent out for consultation and got more than 1200 comments. That input helped inform the proposal for the harmonized regulatory framework on AI, which was based on the NLF approach. The AI Act is currently the first-ever proposed legal framework on artificial intelligence.

Broad definition

The history of Artificial Intelligence goes away back. The term was first used in the 1950s. Gabriele Mazzini explained that based on a recent report by the Commission Joint Research Center there are more than 50 definitions of AI, making it very complex and difficult to find common grounds.

Considering that the greatest majority of EU countries are members of OECD as well as other non-European countries, it was decided to take inspiration from the definition of AI adopted by the OECD in its principles on Artificial Intelligence.

Software categories 

Act distinguishes three categories of AI uses: prohibited AI uses, high-risk AI uses, and systems with transparency risks

In the Artificial Intelligence Act, AI is defined in Article 3 and this is supplemented by Annex I, containing a suite of software development frameworks that encompass machine learning, expert and logic systems, and Bayesian or statistical approaches. A software product featuring these approaches and meeting the requirements of the definition stated in Article 3 will be considered AI for the Act. 

The Act distinguishes three categories of AI uses: prohibited AI uses, high-risk AI uses, and systems with transparency risks. The proposal does not regulate the technology as such, but specific uses. In general, the approach is that the higher the risk, the stricter the rules (risk-based approach).

Prohibited uses of AI

When asked which uses of AI are prohibited, Gabriele Mazzini replied that there are four main categories. The first two relate to the manipulation of a person’s behavior or exploitation of a person’s vulnerabilities due to their age, physical, or mental disability. Also prohibited are the uses consisting in forms of social credit scoring by governments.

The fourth category relates to real-time remote biometric identification in publicly accessible spaces by law enforcement. An exception is made for certain time-limited public safety scenarios such as serious criminal activities. It is up to the member states if they want to make use of the exception.

The AI Act is intended to apply as lex specialis for the rules on the processing of biometric data contained in Article 10 of the Law Enforcement Directive. Also, the uses of remote biometric identification are already regulated by existing law, namely the GDPR.

High-risk classification

The AI Act also defines high-risk AI uses. Gabriele Mazzini explained that the AI Act considers an AI system high-risk if it is used as a safety component of a product that is covered by existing single market harmonization legislation and the product is required to undergo a third-party conformity assessment.

Mandatory third-party conformity checks will incorporate the AI Act’s requirements after the legislation is passed

These mandatory third-party conformity checks will incorporate the AI Act’s requirements after the legislation is passed. In addition, other specifically listed AI systems deployed in several sectors are also deemed to be high-risk to safety or fundamental rights. The Commission can expand this list through a simplified process without new legislation.

The Act relies on member state regulators for enforcement and sanctions, but consistency will be ensured by a European-level board.

Fruitful cooperation with stakeholders

When asked how important the comments and suggestions of stakeholders have been for the drafting of the AI Act, Mr. Mazzini answered that their contributions were very important. It is important to consult and as far as possible have a dialog with stakeholders during the design of regulatory frameworks.

Now the proposal is out to the European Parliament and the Council, which will pursue their debates. Parliamentary committees, responsible for the preparatory work and the Parliament itself meet in public, so stakeholders can follow the discussions on the proposal and make sure that their voice is heard by the decision-makers.

Download PDF version Download PDF version

In case you missed it

Door Closer Adjustments Explained
Door Closer Adjustments Explained

Door closers are required to protect people and property, but they are left useless without the appropriate adjustments. Kirk Smith of Allegion UK explains the key elements of door closer adjustments and how to correctly approach each type. Described as mechanically or electronically controlled closing devices, door closers are designed to open a door safely and close slowly but firmly enough to latch into place. Importance of closing doors When working as intended, closers play an integral role in a building’s operational safety, enabling a user to operate a door in a way that doesn’t harm them or damage the building. More importantly, a working door closer - whether concealed or surface mounted - will keep fire doors closed in the event of a fire, aiding in the compartmentalization of fire and smoke. As part of their building safety advice published in 2020, the UK government recognized the significance of ‘compulsory closers’ and has urged decision-makers and residents to recognize the importance of a working self-closing device. Yet, a lack of sufficient maintenance and installation know-how often results in indoor closers not functioning as required. Fundamental Safeguarding If a door closer is adjusted incorrectly, it can leave doors slamming open and shut compromises fire safety In their best practice guide, the Door Hardware Federation (DHF) states that a minimum power size 3 door closer must be used on fire doors. Additionally, to comply with UK Construction Products Regulations, controlled closing devices must be CE marked, and tested under BS EN 1154 standard and fire rated to BS EN 1634. Aside from using non-compliant hardware, complications arise when a door closer isn’t adjusted correctly. Whether a door is opened manually, mechanically, or electronically, if its accompanying door closer is adjusted incorrectly, it can leave doors slamming open and shut and in some cases, failing to close completely. This compromises fire safety and building security – but it can be corrected. Operations explained Door closers operate by using spring tension, controlled by hydraulic fluid which passes from one section to the next as a door is opened. When the spring pushes the door closed again, the hydraulic fluid passes back to the previous section through a series of valves that control the speed of the mechanism. The valves can be adjusted at the installation stage or regular maintenance periods, and assist in controlling the speed of the door operation. Adjustments Explained When adjusting a door closer, it’s essential to understand the type of correction a closer needs to operate in its desired way. Most adjustments can be implemented by opening and closing the various hydraulic valves found on the body of the door closer. This can be completed by turning them with an Allen key or screwdriver to increase or decrease until the door closes in a safe and controlled manner. Adjustable Closer Speed and Closer Power PowerAdjust mechanism provides a visual guide on the EN power level at which the closer has been adjusted" “In the first instance, if a door is closing with too little or too much speed, users are in danger of leaving the door ajar, or when slamming shut, damaging the surrounding walls or the door and hardware itself. This can lead to fire safety concerns and increased maintenance periods. With this in mind, it’s commonly recommended to locate and adjust the valves so that the fire door closes within a 5-7 second period from a 90-degree angle.” “A PowerAdjust mechanism provides a visual guide on the EN power level at which the closer has been adjusted. This visual guide is useful in showing what strength a door is currently closing at and can detail how many valves turns are required to increase or decrease the power. This helps to avoid overtightening which endangers breaking the regulator oil seal. It’s also key to remember that a minimum power size 3 is required on any fire door.” Adjustable Latch Action “At its most crucial stage of the closing cycle, a door must often overcome seals and latches to close effectively. An unlatched door can facilitate the spread of smoke and fire and renders a fire door useless.” “Adjustable latch action allows you to control the speed of the door in the final 15 degrees of the closing cycle, ensuring the door completes closing and isn’t left unlatched. In the event a door is closing too hard at the final stage, a closer can also be adjusted to soften the final 15 degrees, which helps avoid damage to the lock strike and frame.” Adjustable Backcheck “In some cases, a fire door may be opening too quickly and violently and when poorly adjusted, this can leave the door to jam on the closing cycle.” “To prevent damage to the door or injury to persons standing behind it, we recommend adjusting the backcheck. Doing so will provide a cushioning effect, slowing the door down which is optimal for active building environments such as schools. Even after adjusting the closer, it’s always worth using doorstops.” Adjustable Delayed Action Maximum delay permissible on and a fire door should take no longer than 25 seconds to complete its closing cycle" “A prolonged closing action is useful for busy environments such as schools, hospitals, and care homes – helping users pass through in adequate time.” “By adjusting the delayed action, the speed at which the door closes can be set slower, giving people extra time to pass through the doorway. Adjustable timing is set between 70 degrees and 120 degrees. However, maximum delay permissible on and a fire door should take no longer than 25 seconds to complete its closing cycle.” Adjustable Hold-open “Although mechanical hold open door closers are for use on non-fire doors only, electromagnetic doors can safely implement hold-open door closers under fire safety standards.” Fire door closers operating at optimal speed and strength are a prerequisite for comprehensive fire safety. When it comes to the installation and maintenance of fire door closers, it’s crucial to understand the intricacies of adjustments. After all, it’s never right to risk building safety or non-compliance.

Teledyne’s Handheld Laser Detects Explosive Methane From 100 Feet Away
Teledyne’s Handheld Laser Detects Explosive Methane From 100 Feet Away

A new handheld device can detect the presence of explosive methane gas from up to 100 feet away. For firefighters, the tool provides situational awareness, saves time, and ensures safety from a distance. Knowing the presence of methane gas enables a firefighter to deal with an emergency gas leak and to avoid a deadly explosion. Gas laser The Gas Laser from Teledyne Gas and Flame Detection can shoot a laser beam through a window, a gap in a door, or another common venting point to provide an instant reading of the amount of methane in an area up to 100 feet away. The laser is invisible, but a green-spot pointer guides the aim as a user “points and shoots.” The laser bounces off any reflective object and then analyses the parts per million (ppm) of methane gas per meter of distance along the path of the laser. It measures down to a threshold of 1.25 ppm/meter. The handheld device can also capture a video image and a GPS location in addition to the gas reading stored on the device. It can be connected via WiFi and/or Bluetooth to a smartphone or other device and has onboard data logging. The device is automatically calibrated and tested when it is returned to its case. Detects minute quantities of methane Gas laser detects a much smaller amount of methane than would be explosive, thus preventing explosions  “It’s a brand new device, and everybody wants it,” says Alan Skinner, Regional Manager, Portable Gas Detection for Teledyne Gas and Flame Detection. “Once they understand what it does, they want it. Now you don’t have to be inside a hazard to detect the hazard.” The Gas Laser detects a much smaller amount of methane than would be explosive, thus preventing explosions by addressing leaks early.  The lower explosive limit (LEL) for methane is 5 percent, the equivalent of 50,000 ppm, much higher than the measurement threshold of the Gas Laser. Previously, there was no entirely safe method of evaluating the gas concentration without being near an area, typically using a three-foot probe sensor, for example.  “Now they know what they are getting into before they enter,” says Skinner. “It saves a huge amount of time.” Understanding working of gas laser Getting the word out about the device has been a challenge given the continuing coronavirus pandemic and disruptions of the hurricane season. “It’s one of those products you have to show them and let them play with it to understand what it does,” says Skinner. Interest was high at the recent FDIC show, where Teledyne unveiled the new sensor alongside its broader range of gas detection sensors. Teledyne’s range of portable sensors traces its roots back to GM Instruments (GMI), founded in Scotland in 1947. The sensor company was involved in multiple mergers and acquisitions in recent years, including ownership by companies such as Battery Ventures, Tyco, Scott Instruments, Johnson Controls, and 3M. Two years ago, the product line was acquired by Teledyne and represents the portables segment of their Environmental Monitoring Division, which also includes Detcon, Simtronics, and Oldham. Protege ZM and PS200 sensor PS200 sensor measures levels of four gases – methane, oxygen, carbon monoxide, and hydrogen sulfide Another sensor among Teledyne’s range of handheld devices is the Protégé ZM, a carbon monoxide sensor that a fireman can clip to their helmet, pocket, or bag. The “disposable” device has a 24-month lifespan, requires zero maintenance, and provides a calibration and bump test. The PS200 sensor measures levels of four gases – methane, oxygen, carbon monoxide, and hydrogen sulfide. An internal pump extracts a sample before a firefighter enters a confined space. A charge, bump, and calibration station (ABC Station) ensures calibration on a weekly, monthly, or twice-yearly basis. PS500 and GT Fire sensor The PS500 model adds another sensor to the four – typically either a photoionization detector (PID) for volatile organic compounds such as benzene, or a hydrogen cyanide (HCN) sensor to measure the presence of carcinogenic compounds that can be a byproduct of burning vinyl or plastics. The PID sensor can help investigators detect propellants that might indicate arson. The GT Fire sensor detects explosive gases in the PPM/LEL ranges with optional CO, H2S, and O2 sensors. The device can sniff out small gas leaks before any LEL level is reached. Able to find leaks in the PPM range, the device can pinpoint exactly where gas is leaking.

Weather And Wildfires Are Linked, And Both Are Difficult To Forecast
Weather And Wildfires Are Linked, And Both Are Difficult To Forecast

‘Fire weather’ is the combination of weather and environmental factors that determine the potential spread of a wildfire. Typically, the main concerns are wind, temperature, and moisture. Lightning is also critical as it is a semi-forecastable parameter. Typically, bigger fires need low moisture, high temperatures, and high winds. Too much moisture and fuels (grass and trees) won’t burn. If the winds are too weak, the fire becomes easily contained and unable to create spot fires, where embers ride the winds to more dry fuels. Hot temperatures help dry out the fuels, and fires have a difficult time starting in colder environments. Forecasting fire weather Predicting both the weather and wildfires depends on the scale of forecast. Both start by looking at the larger, background environment that is more easily predicted over a longer time. “As you get down to individual thunderstorms or individual fires, the forecasts drive towards hours or minutes and at much smaller distances,” says Renny Vandewege, DTN Vice President of Weather Operations. “The main difference is that with weather the environment and triggers are known. With wildfires, the triggers can be human influenced, which are not modeled as well.” Private company DTN has seen an increased desire for forecasting of ‘fire weather’ during the horrific wildfire season this summer. New technology specifically helps accurately forecast fire weather so utilities can be prepared for the possibility of fires and shut down to help save lives and property. Predicting both the weather and wildfires depends on the scale of forecast Driving business forward As a data, analytics and technology company, DTN delivers operational intelligence to organizations with complex supply chains around the world including the aviation, energy, offshore, shipping, transportation, and sports and safety markets. DTN’s more than 1,000 employees operate globally to ensure local understanding of the insights needed to drive business forward. Prolonged high heat is typically accompanied by exceedingly dry conditions Air temperature can help pre-heat the environment, making it more favorable for fires to start and spread, says Vandewege. Prolonged high heat is typically accompanied by exceedingly dry conditions. This heat dries out the fuels, making them more susceptible to catching an ember and becoming a fire. In July 2021, prolonged high heat across California and the Pacific Northwest aided in drying out fuels which, when sparked by lightning and driven by high winds, burned well over one million acres. Life-Threatening situations Fires feed back into the environment is several ways, says Vandewege. Fires can preheat the air around them, especially when being driven by the wind up a slope. This can create a situation where the fire spreads quicker into the hotter, drier area, rapidly expanding in coverage and creating life-threatening situations for misplaced crews. Further, winds can carry the embers of trees that are ablaze, thus creating spot fires beyond firebreaks or riverbeds. Controlled fires use up the fuels, preventing rapid and expansive fire growth, as well as stimulate new plant development. A ‘fire whirl’ forms when an intense fire heats up an area. This hot air rises quicky, and more air rushes in at the surface to replace that air and then it heats and rises. As more air is drawn in, it collides and begins to rotate, creating a fire whirl. There is also potential for pyro cumulus clouds to create some tornado-like activity Pyro cumulus clouds There is also potential for pyro cumulus clouds (the billowing clouds associated with high intensity wildfires) to create some tornado-like activity, sometimes referred to as a firenado (although the term is a misnomer).  “There are currently lightning climatologies for weeks and months in a fire season but given that the fire season often lines up with the dry season, that information is not very useful,” says Vandewege. “We typically look for dry thunderstorm setups, where the instability is large (due to high heat), but the moisture is more in the middle and upper levels of the atmosphere. This way any rain that forms evaporates before hitting the surface, preventing fuels from becoming wet. Once meteorologists see that type of signal, it’s mostly a waiting game to see where the fire starts.”

vfd