A fault-tolerant network of fire alarm control panels from Advanced has been selected to protect the 3Ts Redevelopment program at the Royal Sussex County Hospital.

36 four-loop MxPro 5 fire panels, 46 repeater panels, and two custom-built AdSpecials panels from UK-manufacturer, Advanced, are to be installed at Brighton’s 3Ts hospital redevelopment as part of phase one of the program.

Phase one involves the construction of a 13-storey building with two basement levels, located on the main Royal Sussex County Hospital site. Incorporating all the functions of a modern hospital, the building will include a three-storey atrium reception, outpatient departments, operating theatres, wards, a teaching facility, and administration facilities.

MxPro 5 fire panels

The three-phase building works will deliver improved accommodation for more than 40 wards and departments, supporting the Trust’s role as a regional center for teaching, trauma, and tertiary care at Royal Sussex County Hospital. The new facilities meet the highest clinical standards and offering patients a modern, spacious care environment.

The Essex-based firm will install Advanced’s pioneering MxPro 5 fire panels alongside bespoke sprinkler indication

Taking a lead role in the cabling, first and second fix for the fire system throughout phase one of the project are EA-RS Fire Engineering Ltd. The Essex-based firm will install Advanced’s pioneering MxPro 5 fire panels alongside bespoke sprinkler indication and ventilation override panels, all linked to approximately 5,000 Hochiki devices.

High-performing protection

Chris Goddard, Project Manager at EA-RS Fire Engineering Ltd, said: “The 3Ts redevelopment project represents a massive healthcare investment for Brighton & Sussex University Hospitals NHS Trust and, once completed, will offer an improved experience for thousands of hospital patients each year.”

Configuring protection across a site of this size can often appear daunting, however, the MxPro 5’s ease of installation and scalability will help to make the challenge of implementing protection effortless. As long-term users of Advanced, we’re confident that its solutions will be capable of delivering high-performing protection across the hospital’s large number of zones, many with their own complex cause and effect requirements.”

BMS integration

Amanda Hope, UK Business Development Manager at Advanced, said: “We’re proud to be supplying our partners, EA-RS Fire Engineering Ltd, with the equipment required to ensure that the valued healthcare staff, patients, and these state-of-the-art facilities will be protected by a cutting-edge fire system for years to come.

The fire system will include BMS integration and a custom graphics package to provide visual representation of the fire system to end-users. The custom-built sprinkler indication and ventilation override panels will be a showcase for the fantastic design and manufacturing work done by our in-house AdSpecials department.”

As work progresses on the redevelopment of Royal Sussex County Hospital, Advanced’s high-speed, fault tolerant networks, that are renowned for their resilience, will come into their own, with the expansion of the fire detection system across phases two and three of the project.”

Multiprotocol fire system solution

Once complete, the two new clinical buildings of phase one and two will cover the front half of the hospital site

Phase two of the development is a seven-storey building extending the functions of the first building, with stage three being a smaller delivery and service area to improve site management. Once complete, the two new clinical buildings of phase one and two will cover the front half of the hospital site.

MxPro 5 is the fire industry’s pioneering multiprotocol fire system solution and was recently certified by FM Approvals to the EN 54 standard. It offers customers a choice of four detector protocols and a completely open installer network, backed up by free training and support. MxPro 5 panels can be used in single-loop, single-panel format, or easily configured into high-speed networks of up to 200 panels covering huge areas. Ease of installation and configuration, as well as its wide peripheral range, make MxPro 5 customizable to almost any application.

Advanced, owned by FTSE 100 company Halma PLC, protects a wide range of prestigious and high-profile sites across the globe, from London’s Shard and Lloyds building to Abu Dhabi International Airport and the Hagia Sophia historic site in Turkey.

Share with LinkedIn Share with Twitter Share with Facebook Share with Facebook
Download PDF version Download PDF version

In case you missed it

What Impact Has COVID-19 Had On The Fire Industry?
What Impact Has COVID-19 Had On The Fire Industry?

The COVID-19 pandemic has had ramifications for almost every industry, some more than others. With the pandemic stretching well into a second year, the non-medical consequences continue, and many are wondering about which of the required changes might become permanent. As regards the fire sector, we asked our Expert Panel Roundtable: What impact has COVID-19 had on the fire industry?

Keeping The Fires Out And The Lights On
Keeping The Fires Out And The Lights On

The UK’s demand for sustainable heat and power sources is increasing rapidly. This is seeing a growing dependence on renewable energy sources for electricity, and, as we’re facing a landscape of constrained power generation, consistency of this power source is becoming a key concern. Fire is an evolving risk for power stations. It can cause prolonged outages, which are damaging to sites’ personnel, equipment, and fuels. However, these fires are very common. James Mountain, Sales, and Marketing Director, Fire Shield Systems, looks at the current system underlying fire safety for power stations, exploring why a new approach is needed.   Traditional Fire Safety guidance  Over the past ten years, The National Fire Protection Association’s NFPA 850 Recommended practice for electric generating plants and high voltage direct current converter stations has been seen as the exemplar internationally for fire safety at power generation sites. These recommendations sit alongside a complex mix of regulations managing the fire protection across sites that create power from combustible feedstocks. Those feedstocks can either be derived from organic sources, including wood and agriculture or refuse sources, including household waste. The exploration of alternative systems is limited, but different fuels and processes need different suppression, detection, and monitoring systems to remain effective. However, chapter nine of the guidance dedicates only four of its 70 pages to the fire risks specifically pertaining to the handling and storage of alternative fuels, a rising concern for the power generation industry. Practical experience of advising on the fire safety for sites handling these fuels has revealed a conflicting array of approaches to risk mitigation, many of which are guided by the owner, led by the insurance industry. For the insurance industry, the main concern is protecting fuels, assets, and equipment. However, insurers often rely on more traditional methods to offer that protection, such as sprinkler systems, despite these not always being suitable in protecting certain types of feedstocks. The exploration of alternative systems is limited, but different fuels and processes need different suppression, detection, and monitoring systems to remain effective. To better address, the growing challenges faced, best practice legislation and guidance for power generation sites needs to reflect real work scenarios, including the myriad incidents which have occurred throughout the past decade.   What are the risks When Dealing with alternative fuel?  When it comes to dealing with alternative fuels, storage, movement, processing, and transportation all present significant fire risks. These risks become more complex with alternative fuels compared with others as, to protect the site effectively, there’s a need to understand their unique properties, consistencies, ingress of hazardous materials, and their reactions on contact with water and foams. When it comes to dealing with alternative fuels, storage, movement, processing, and transportation all present significant fire risks The myriad risks, from carbon monoxide (CO) emissions to large explosions, are guided by an equally complicated set of fire safety guidance. Research into the safe handling and storage of these fuels, and the most suitable mitigation measures to offset the risks, is ongoing. Detecting and monitoring heat within alternative fuels when stored is also challenging, as the material is also an insulator. This means fire and heat are often difficult to identify in their early stages, prior to a blaze taking hold. Some types of alternative fuels are also prone to self-combustion if not monitored carefully. The risk of fires burning slowly within these materials is the topic of a major study from Emerging Risks from Smouldering Fires (EMRIS) between 2015 and 2020. The need for new best practice guidance in fire safety As methods for generating renewable power mature, and new technologies and research emerge, fire safety guidance needs to be updated to reflect this. This is not only a UK-wide challenge, but it’s also recognized across global and European standards. Regulations need to take into account a range of factors to ensure protection systems are effective in practice. The development of renewable power sources requires revision of fire safety guidance. Now, a decade on from when the NFPA 850 was first published, it’s time to revisit its guidance and focus on building a more resilient, fire-safe future for all of the UK’s 78 biomass and 48 waste to energy sites. This involves greater clarity pertaining to the specific risks associated with alternative fuels, such as waste and biomass-derived fuels. The approach needs to be comprehensive, looking at every aspect of designing, installing, and maintaining systems.While the power generation industry remains reliant on outdated and complex guidance, with conflicting approaches to best practice protection, the potential for systems to fail is clear. That robust approach relies on multiple stakeholders working together – including the regulators, government, academics, technology partners, and fire safety professionals. Collaboration is key to build long-term confidence in the safety of sustainable fuels in powering our homes, transport, and industries in the future.

Spot Fires Before They Start: Thermal Imaging For High-Risk Sites
Spot Fires Before They Start: Thermal Imaging For High-Risk Sites

Waste management sites are particularly vulnerable to fires, with hundreds reported every year, just in the UK. The materials stored in a waste heap make them particularly risky environments. ‘Hot spot’ fires, as they’re called, can be caused by chemical waste, flammable items, or the heat caused by the natural breakdown of organic materials.  A blaze can start quickly and without warning, building into a major issue that can threaten lives and livelihoods. And not only that - but in many cases, insurers now require sites to be putting additional updated fire prevention measures in place, in order to validate their existing policies. All this makes it more important than ever to have effective prevention and detection measures on-site, with the ability to extinguish fires swiftly should they develop. Preventing poor prevention Early detection is vital for preventing the dire consequences of a fire. The traditional approaches - manual inspection, gas detection, or basic thermal monitoring - all come with major limitations. Thermal camera prevention software can instantly detect when temperatures are outside of the normal range They all take time and, to be honest, they’re all pretty unreliable. Waste piles can often be many meters deep. When you smell the smoke or see the flames, it’s too late. The damage has already been done and by that stage, you’re long past prevention. Real prevention needs to start earlier, and deeper below the surface. It is said that necessity is the mother of all invention - and out of this need to keep sites safe comes high-resolution fire prevention thermal imaging. Thermal Cameras Thermal cameras from manufacturers such as FLIR, can constantly monitor temperatures across a site. They are highly sensitive to temperature, being accurate to within half a degree centigrade, and programmed to detect heat signatures deep below the surface. This type of prevention software can instantly detect when temperatures are outside of the normal range. A flame will develop at 122 degrees centigrade. If you can catch an elevated temperature and lower it before it reaches that stage, you can stop the fire before it even begins. Oscillating Water Cannons Should the temperature in any area rise enough to become a fire risk – typically 60 degrees centigrade or above – thermal imaging cameras can trigger an alert, informing the operator.  It can be combined with location monitoring software for fast identification of possible ‘hot spots’, and even connected to automated, oscillating water cannons which can locate and extinguish hot spots in seconds. The system will then activate a pair of automated, oscillating water cannons, spraying the affected area to reduce the temperature or extinguish the fire. Distinguish before you extinguish False alarms are a risk with thermal systems. The last thing you want is a sprinkler system going off because a camera detected the heat from a vehicle exhaust. The latest systems can be programmed to distinguish between acceptable heat signatures, such as vehicles, and genuine potential fire risks. On-site fire prevention can now be safer, more reliable, and more efficient, with fewer false alarms Solutions like this have been developed recently by UK machine vision integrator Bytronic, fire prevention imaging supplier Thermascan, and Swedish firm Termisk Systemteknik, using FLIR technology to create a reliable and automated solution to keep sites safe, with rapid detection at a temperature level. In one site, the water cannons were programmed to adjust water pressure and reach based on the location of the hot spot, before automatically deactivating once the temperature has cooled sufficiently. Meanwhile, the thermal cameras – which can detect fires even through thick smoke – monitor the progress of a fire beyond what’s visible with the naked eye. The future of fire prevention? For sites used to manual inspection and sprinkler systems, this technology could be a step-change. The old ways may have been partially effective, but were more likely to be overly sensitive and not targeted to the affected areas, taking more time and potentially causing water damage and pollution elsewhere. With newer automated, thermal imaging solutions, on-site fire prevention can now be safer, more reliable, and more efficient, with fewer false alarms. When hot spots occur, they can be swiftly extinguished with pinpoint accuracy, limiting water waste, property damage, and environmental pollution. It can mean the difference between a successful insurance payment or a significant financial hit, should the worst happen. But with the proper prevention, that worst situation may never occur.

vfd