Download PDF version

Electric bikes and scooters are a newly popular way to travel through urban environments. However, the nifty devices come with a fire risk that could be deadly. In London, firefighters have responded to more than 25 fires, involving e-bikes or e-scooters in recent months, some of them significant incidents with serious injuries.

Lithium-ion batteries pose fire risks

The fire hazards of e-bikes and e-scooters stem from their use of rechargeable lithium-ion batteries that can erupt into flames. Complicating the problem is use of unauthorized or third-party batteries that may not be safe.

E-bike conversion kits are available to convert standard bikes into e-bikes, but they include only the motors and control gears. Batteries must be sourced separately, often over the internet and by cost-conscious buyers, who may not consider safety issues. Cheaper batteries may be faulty.

Using trusted batteries and proper storage

Firefighters urge residents to use only trusted batteries and to store them correctly

Damaged batteries are also problematic. Spare batteries should not be knocked around, which can increase the likelihood of damage to the cells. Firefighters urge residents to use only trusted batteries and to store them correctly.

In one recent incident, a first floor flat in Brixton in south London was badly damaged, after a fire was caused by a fault in the lithium-ion battery pack of a mountain bike that had been converted into an e-bike. In another incident, five people were taken to hospital, after a fire at a flat in Southwark in Central London, caused by the failure of a battery in an electric scooter on charge.

In the United Kingdom, anyone over 14 years old can ride an ‘electrically assisted pedal cycle’ (EAPC) without a license and with no need to register, pay tax or ensure the bike.

Parameters for e-bikes in the UK

The bike must meet certain requirements, such as displaying the power output and motor manufacturer, showing either the battery voltage or the maximum speed of the bike, and having a maximum power output of 250 watts. The electric motor should not be able to propel the bike, when it’s traveling more than 15.5 mph.

Assuming a bike (or vehicle with more than two wheels, such as a tricycle), meets the requirements, it is classified as a normal pedal bike and can be ridden on cycle paths, and anywhere else where pedal bikes are allowed.

E-scooters for emission-free transport

E-scooters are stand-up, electrically powered scooters that are becoming more popular in urban environments

E-scooters are stand-up, electrically powered scooters that are becoming more popular in urban environments, providing individual and emission-free transport.

In a city like London, e-bikes are a familiar sight. Riders may store and charge their e-bikes in communal areas or hallways, when they are home. This practice heightens the fire danger, because any fire that erupts is likely to block an escape route and trap occupants within the building.

Avoiding unsafe mixing of batteries and chargers

The London Fire Brigade’s Fire Investigation team has seen incidents involving multiple batteries and chargers for a number of bikes at one property, which has resulted in the unsafe mixing of batteries and chargers. Lithium-ion batteries are susceptible to failure, if charged incorrectly, which may be a contributing factor in some incidents.

Batteries can get warm during use and should be allowed to cool down, before attempting to re-charge. They should also be charged on hard, flat surfaces, in order to allow heat to dissipate. Chargers and batteries should not be left unattended or while residents are asleep. Installation of smoke alarms is advisable in areas where e-bikes or e-scooters are being charged.

Download PDF version Download PDF version

Author profile

Larry Anderson Editor, TheBigRedGuide.com, Notting Hill Media

In case you missed it

How Does Thermal Imaging Serve The Needs Of Firefighters?
How Does Thermal Imaging Serve The Needs Of Firefighters?

Thermal imaging is an advantageous tool for firefighters on the frontline. As thermal cameras have become more compact and affordable, their availability has expanded, along with their usefulness. We asked our Expert Panel Roundtable: How does thermal imaging serve the needs of firefighters and how is it changing?  

Why Should I Consider Fire Water Runoff?
Why Should I Consider Fire Water Runoff?

Fires have devastating consequences, not just posing a threat to property, but also to human life. Fires can also have detrimental impacts on the environment, with one of the largest associated environmental issues being water runoff occurring from tackling the fire. What is Fire Water Runoff? - Water is widely used to extinguish fire, thanks to its accessibility and effectiveness. Typically, water isn’t hazardous and doesn’t pose any threats, however, it can easily become contaminated by any materials stored onsite, or combustion by-products. Some water will evaporate with the fire, some will infiltrate into the ground, and any excess will runoff. Managing fire water runoff What are the Risks? - Fire water runoff can contain chemicals which are toxic to soils, drinking water, and aquatic life in surface water. Runoff can enter the environment through various pathways, including absorption into the ground, draining into both surface and foul drains, or runoff into bodies of water. The resulting pollution can cause detrimental environmental harm particularly if groundwater becomes contaminated, and even pose a threat to public health. Fire water can carry contaminants a long distance, expanding the impacted area Fire water can carry contaminants a long distance, expanding the impacted area. Alongside the environmental impacts, the ‘polluter pays’ principle underpins most of the regulation of pollution affecting land, water and air quality. If you do not manage fire water runoff, you could be prosecuted and be liable for the clean-up costs. Flood risk assessment How to Identify Risk? - It is important to carry out a thorough risk assessment. If you are yet to move into a property a thorough flood risk assessment is recommended, however, all businesses should consider their fire water regardless of how long they have been at a site. Enlisting a specialist will make the process much easier, and ensure it is carried out accurately, efficiently, and in-line with best practice and guidance. It’s important this step is undertaken before there could be any potential risk from fire to ensure a thorough plan and procedure is in place. The risk assessment should consider areas such as the site topography, drainage connectivity, materials and substances stored on site, along with the current storage arrangements. There should also be consideration given to how much water is likely to be required to extinguish a fire. Robust emergency plans Having the necessary policies and procedures in place will undoubtedly reduce the potential impact As part of the risk assessment, a drainage plan should be created and recorded, which will also be useful for site maintenance. Ideally, all relevant information should be stored within accessible BIM (Building Information Modeling) software. Having the necessary policies and procedures in place will undoubtedly reduce the potential impact. All businesses should have robust emergency plans, with higher risk businesses such as COMAH (Control of Major Accident Hazards) sites legally required to have more comprehensive and detailed plans. Many commercial and industrial sites store potentially hazardous chemicals or materials, which would be highly polluting should they enter a watercourse with fire water. The subsequent runoff can lead to a major accident to the environment. Preventing fire water To prevent fire water from causing pollution, it can be contained, reducing the risk of contamination occurring. There are various methods for containment which may include: Drainage shut off valves. Bunds. Containment lagoons or underground storage tanks. More simple methods can include aspects such as drainage covers or spill kits. An experienced and qualified professional will be able to help you prepare for managing your fire water. Environmental protection is of paramount importance, and by assessing and managing the associated risks, natural resources and ecosystems can be safeguarded. Notwithstanding a company’s regulatory obligations, and noting that in the vast majority of instances the ‘polluter pays’, the expectations of Corporate Social Responsibility alone make it good practice to demonstrate exemplary environmental compliance. Our team at FPS Environmental can help you by creating a fire water management plan which will identify ways to support water pollution prevention.

Teledyne’s Handheld Laser Detects Explosive Methane From 100 Feet Away
Teledyne’s Handheld Laser Detects Explosive Methane From 100 Feet Away

A new handheld device can detect the presence of explosive methane gas from up to 100 feet away. For firefighters, the tool provides situational awareness, saves time, and ensures safety from a distance. Knowing the presence of methane gas enables a firefighter to deal with an emergency gas leak and to avoid a deadly explosion. Gas laser The Gas Laser from Teledyne Gas and Flame Detection can shoot a laser beam through a window, a gap in a door, or another common venting point to provide an instant reading of the amount of methane in an area up to 100 feet away. The laser is invisible, but a green-spot pointer guides the aim as a user “points and shoots.” The laser bounces off any reflective object and then analyses the parts per million (ppm) of methane gas per meter of distance along the path of the laser. It measures down to a threshold of 1.25 ppm/meter. The handheld device can also capture a video image and a GPS location in addition to the gas reading stored on the device. It can be connected via WiFi and/or Bluetooth to a smartphone or other device and has onboard data logging. The device is automatically calibrated and tested when it is returned to its case. Detects minute quantities of methane Gas laser detects a much smaller amount of methane than would be explosive, thus preventing explosions  “It’s a brand new device, and everybody wants it,” says Alan Skinner, Regional Manager, Portable Gas Detection for Teledyne Gas and Flame Detection. “Once they understand what it does, they want it. Now you don’t have to be inside a hazard to detect the hazard.” The Gas Laser detects a much smaller amount of methane than would be explosive, thus preventing explosions by addressing leaks early.  The lower explosive limit (LEL) for methane is 5 percent, the equivalent of 50,000 ppm, much higher than the measurement threshold of the Gas Laser. Previously, there was no entirely safe method of evaluating the gas concentration without being near an area, typically using a three-foot probe sensor, for example.  “Now they know what they are getting into before they enter,” says Skinner. “It saves a huge amount of time.” Understanding working of gas laser Getting the word out about the device has been a challenge given the continuing coronavirus pandemic and disruptions of the hurricane season. “It’s one of those products you have to show them and let them play with it to understand what it does,” says Skinner. Interest was high at the recent FDIC show, where Teledyne unveiled the new sensor alongside its broader range of gas detection sensors. Teledyne’s range of portable sensors traces its roots back to GM Instruments (GMI), founded in Scotland in 1947. The sensor company was involved in multiple mergers and acquisitions in recent years, including ownership by companies such as Battery Ventures, Tyco, Scott Instruments, Johnson Controls, and 3M. Two years ago, the product line was acquired by Teledyne and represents the portables segment of their Environmental Monitoring Division, which also includes Detcon, Simtronics, and Oldham. Protege ZM and PS200 sensor PS200 sensor measures levels of four gases – methane, oxygen, carbon monoxide, and hydrogen sulfide Another sensor among Teledyne’s range of handheld devices is the Protégé ZM, a carbon monoxide sensor that a fireman can clip to their helmet, pocket, or bag. The “disposable” device has a 24-month lifespan, requires zero maintenance, and provides a calibration and bump test. The PS200 sensor measures levels of four gases – methane, oxygen, carbon monoxide, and hydrogen sulfide. An internal pump extracts a sample before a firefighter enters a confined space. A charge, bump, and calibration station (ABC Station) ensures calibration on a weekly, monthly, or twice-yearly basis. PS500 and GT Fire sensor The PS500 model adds another sensor to the four – typically either a photoionization detector (PID) for volatile organic compounds such as benzene, or a hydrogen cyanide (HCN) sensor to measure the presence of carcinogenic compounds that can be a byproduct of burning vinyl or plastics. The PID sensor can help investigators detect propellants that might indicate arson. The GT Fire sensor detects explosive gases in the PPM/LEL ranges with optional CO, H2S, and O2 sensors. The device can sniff out small gas leaks before any LEL level is reached. Able to find leaks in the PPM range, the device can pinpoint exactly where gas is leaking.

vfd