Eltek Fire & Safety Fire Detectors(26)
Browse Fire Detectors
Detector products updated recently
Mathew Baxter is the Founder and CEO of the echelon group with responsibility for the management of echelon Consultancy, Pretium Frameworks and echelon Improvement Partnerships. Mathew has spent most of his working life in the construction sector. The devastating Grenfell Tower fire has prompted what the government has referred to as ‘the biggest change in building safety for a generation’. So what do the Building Safety and the Fire Safety Bills mean in terms of emergent legislation and is the housing industry prepared for substantive change on this scale? Fire Safety Bill Let’s start with the new Fire Safety Bill, which has been designed to give clear definitive guidance principally around areas of responsibility for fire safety. One way of looking at the new Fire Safety Bill is as a piece of legislation designed to beef up the existing legislation, focused specifically around the envelope of the building. The Fire Safety Bill makes it clear that the person designated as responsible has undertaken a fire safety survey around exterior walls (including cladding, balconies and windows) and individual flat walls entrance doors, where they open onto common parts to make sure they are compliant and if not, then to take any necessary remedial action and precautions to make that building safe. We suspect that demand for fire experts may rapidly outstrip supply. Building Safety Bill The Building Safety Bill proposes a significant amount of consultation is going to be required with residents The Building Safety Bill proposes a significant amount of consultation is going to be required with residents. Every ‘higher risk’ property has to have a strategy around the program of change that it will need. Resident consultation exercises will result in organic documents that will live as long as that building is occupied. Ideally all stakeholders (for example repairs contractors) coming in and out of properties should be encouraged and trained to take a holistic view of that property, and to be prepared to raise an alert, if they see something that is not right, for example, a fire door that has been propped open. Checking and replacing old appliances Many fires are caused by residents’ own appliances. Some local authorities are checking tenants’ appliances and if they seem unsafe, either removing or disconnecting them and in some cases, they are also providing free replacements. Housing associations and landlords will need to demonstrate a comprehensive understanding of their property and stock. For example, if you have a cladded building, you need to know exactly what the specification of that cladding is. Not all cladding is equal and risk profiles vary. Intrusive surveys may be required to ascertain the exact construction and product used. There is still a clear issue that many building owners/managers are unsure of what their building is clad in and how the cladding is fixed for the building. Effectively, this is something landlords need to get a comprehensive understanding of immediately, for fear of very rapid enforcement action from the Local Authority. Adherence to fire safety regulation compliance Local Authorities are entirely within their rights to approach housing associations and ask for copies of the fire safety regulation compliance of these buildings and if it has not been done then they can take action and that can include decanting the whole building and ordering remedial works As previously mentioned, two new roles are also specified within the Building Safety Bill, that of the Accountable Person within an organization for fire safety and the Building Safety Manager. It is anticipated that the role of the Accountable Person role will need to be fulfilled by a senior member of staff within the client organization and the Building Safety Manager will have a high level of responsibility and accountability for maintaining the safety of the building. Competency frameworks and resident engagement strategies The Building Safety Bill may have a grace period, before it comes into force on existing buildings The Building Safety Bill may have a grace period, before it comes into force on existing buildings and elements that are likely to be included are already being discussed, for example competency frameworks, resident engagement strategies and two separate roles, namely Building Safety Managers and Accountable Person. One of the most significant changes that the Building Safety Bill will create is a new definition of buildings as ‘higher risk’ buildings. This category will obviously include high rise, but also student accommodation and supported living accommodation. High risk buildings Any building over 18 meters, or more than six floors high is immediately defined as high risk. The Bill also makes it clear that the new Building Safety Regulator (created under the Bill) can also add other buildings to the category at their discretion. The Bill places a lot more responsibility on landlords and owners of those buildings. In fact, the Accountable Person has legal responsibility for those buildings, as long as they are occupied. Assessment of fire safety risks Responsibilities include the assessment of fire safety risks, co-operation with any remedial action in terms of fire safety, the registration of high-rise buildings, building safety information and the appointment of the building safety manager. The Accountable Person has a duty to report the name and details of the Building Safety Manager to the Building Safety Regulator. This individual’s contact details have to be available to everyone in the building, a safety case report has to be undertaken and managed along with a risk assessment and an ongoing strategy for the safety of the building and information provided to the new regulator. If the Building Safety Manager is found to be non-compliant then she/he risks a prison sentence. Many of the clients are appointing Building Safety Managers directly with a salary between £60,000 – £70,000. The guidance is that they should not look after more than five buildings each, as the responsibility carries too much weight for more and as such, this represents a significant resource for many landlords with a large portfolio of ‘higher risk’ buildings. Undefined transition period for Act rollout The new Building Safety Regulator will become the Building Control Authority for higher risk building There is expected to be an as yet undefined transition period before the Act applies to existing buildings. As well as the changes that will be necessary to existing buildings, it is essential that consideration is given to the design and thought process behind new developments and new builds. There is a whole new regime for the design and construction phase. The new Building Safety Regulator will become the Building Control Authority for higher risk buildings. Developers are no longer able to choose their building control authority at will. This imposes strict competency requirements on all duty holders working on higher risk buildings, including the client, the principal designer and principal contractor. Impact of the two safety bills The impact on these two Bills will have an enormous impact on leaseholders and indeed everyone involved in construction and building maintenance. The administrative burden and personal responsibility on those accountable will be equally enormous but, in our view, in the light of Grenfell, absolutely necessary. Our advice to all our clients is to start planning ahead and to develop a strategy of how they will deliver all the aspects of the Building Safety Bill once it becomes legislation.
As Grenfell remains a chilling reminder of the importance of fire safety in construction, new digital methods are now being adopted to guarantee the safety of end users. But how is digitization helping and how will this further advance fire safety during the wider construction process? There’s no doubt that the past five years have had a profound effect on the construction industry. Events such as the 2017 Grenfell Tower fire disaster have forced the industry to sit-up and rethink the processes it currently has in place. Campaign for a complete system overhaul The result has been a campaign for a complete system overhaul. Advocates for change, such as Dame Judith Hackitt, are now speaking at length of a ‘broken industry’ and how without major reform, the construction industry will never reach acceptable levels of safety. Yet hope is on the horizon and as is often the case with such events, they can and must serve as a catalyst for major change. Hackitt’s inquiry into building regulations and fire safety, following Grenfell, revealed a need for greater fail safes and a requirement for what Hackitt termed as ‘The Golden Thread’ of information. This is an accurate record of a building, providing a timeline of what has gone into the structure, from design to occupation and its ongoing maintenance. By having this in place, the industry can then deliver full transparency and accountability to help keep end users safe. Introduction of new building safety regulator Hackitt’s inquiry into building regulations and fire safety, following Grenfell, revealed a need for greater fail safesA further response has been the introduction of a new building safety regulator and new construction product regulator, both of which represent a landmark moment not just in fire safety, but improved levels of safety across the board. The first, which is under the Health and Safety Executive, will oversee the safety and performance of all buildings with a new, more stringent framework for higher-risk builds. The latter, (the construction product regulator), will be aimed at manufacturers to ensure that their products are safe, before being sold and that they abide by pre-determined levels of industry safety. If products aren’t deemed fit for purpose, these stricter measures will grant the regulator the power to remove products, revoke building safety certifications, as well as prosecute those who attempt to side-step rules. Building Safety Bill Speaking at the Construction Leaders’ Summit in February 2020, Hackitt explained that the Building Safety Bill and the creation of the new regulators will help the sector to change both technically and culturally, moving away from decisions that result in the ‘cheapest solution’, to one where safety and quality become paramount. Hackitt also warned that the regulators will have real bite. She said, “It will not look to see you have merely followed the rules, but check the building is safe from planning to occupation and you’ve done everything in your power to ensure this.” New laws post building regulations and fire safety review New laws have also been introduced since Hackitt’s review of building regulations and fire safety New laws have also been introduced since Hackitt’s review of building regulations and fire safety. In April of 2020, UK Housing Secretary, Robert Jenrick announced a series of measures comprising of what he called ‘the biggest change in building safety for a generation.’ These were changes that applied to multi-occupancy buildings of 18 meters and above, or six stories, whichever is reached first. For buildings in-scope, a duty holder regime will apply, with a Client, Principal Designer and Principal Contractor. The contractor and designers will have to demonstrate that the building is safe and the ability of the duty-holder to choose which building control body to oversee the removal of the construction/refurbishment. To make sure the regulation is followed, there are gateway points at various stages, requiring regulator sign-off before the project can move forward. The sign-off procedure can then only take place once the right evidence is in place. Before residents are allowed to occupy the building, a full digital documentation will have to be provided which includes drawings and datasets and any design changes will need to be amended, signed-off and recorded. The need for digital adoption It’s clear that with so many changes coming into play that a new way of working is needed, with the needle pointing towards digital adoption as an answer to these issues. One of its main benefits is that it gives specifiers, contractors and residents the ability to access extensive datasets on specific fire related products. This feature plays a huge role in guaranteeing the safety of buildings and end users, by supplying them with the most up-to-date information and the latest in industry laws and regulations. If the industry is to iron-out the risk of products being ‘mis-specified’, then architects must be given a vehicle to access this information as easily as possible. Rise in use of digital tools, 3D and data Another example is the recent changes to the RIBA Plan of Work – the industry blueprint for the process management of a build. While this still remains as the ‘go-to’ map for how a construction process should take place, digital innovation continues to transform many aspects of its project workflow. This can be seen in the likes of ‘Part 3 – Changing Processes’ where the use of digital tools is helping to shift the balance away from 2D information towards 3D and data. Digital site surveys are also becoming the norm, using cloud surveys, photogrammetry, lidar sensors and the ability to mount cameras on drones, to help with the success of projects. BIM (Building Information Modeling) BIM can be used to improve the design, construction and operation of buildings, making them safer for end users Feeding into this is also the greater use of BIM (Building Information Modeling). This digital approach can be used to improve the design, construction and operation of buildings, making them safer for end users. Again, it’s a concept that has been around for some time, but the recent shift in perceptions has allowed this way of working to flourish, with three quarters of specifiers now using BIM, compared to just one in ten a decade ago. Digitization – The only way forward It’s obvious to see that shifting to digital has an immeasurable benefit to the future of the construction industry. Not only do digital tools improve standards, reduce mistakes and improve record keeping and auditing at every stage, but it also keeps costs down and drives up quality. From previous history, we’ve seen that the construction industry is notorious for dragging its heels when it comes to change, but as we’ve seen so far, the quicker it adopts this way of thinking, the quicker improvements in fire safety and compliance can be achieved. ‘Build Back Better’ We’ve heard the government talk of ‘Build Back Better’ and the digitization of the industry will hold all the keys to ensuring this is possible. If nothing else, the construction industry owes it to the victims and survivors of the Grenfell fire tragedy to make sure that all is being done to eradicate the chances of future mistakes from happening again.
Innovation in the fire protection industry can oftentimes be slow to move forward, particularly when compared to other similar industries. This is because legislation, regulation, and enforcement, while all necessary proponents within the sector, can often slow the tide of revolutionary ideas. However, the ability to innovate in this industry can quite literally be a matter of life and death. The developing intricacies of modern infrastructure and the demand for more sustainable solutions must also fuel the need for innovation. Fortunately, there are many companies at the forefront of technical and digital transformation within the industry. At the NFPA Conference in June 2019, much of the chatter revolved around Smart Connected Things (SCoT) within fire protection systems. Smart Technology Smart Tech can offer more accurate, efficient inspections and testing, which on its own is capable of saving lives These systems are now being used by both building owners and service providers to determine fire protection system conditions as well as helping to perform some critical testing functions remotely - which of course has been invaluable in 2020. Smart Tech can offer more accurate, efficient inspections and testing, which on its own is capable of saving lives and protecting valuable property. For example, if a warehouse has been equipped with smart tech solutions to observe water pressure and flow rates within a building sprinkler system, users can have a real-time view of how much water has been flowing per minute. This means that should a fire break out in a particular part of the building the flow rate within the sprinkler can be routed to that specific area to put the blaze out as efficiently and as quickly as possible. Advanced Smoke Detection Fire protection brands have made huge leaps forward in their quest to develop smoke detectors which meet with the UL 268 Safety Standards for 2020. The new standard requires that all smoke alarms and detectors must meet two critical benchmarks: Increased responsiveness to the new polyurethane foam tests. Ability to distinguish the difference between smoke aerosols from accidental fire sources and smoke aerosols from cooking sources. Basically, domestic smoke detectors must be able to understand the difference between materials, based on the kinds of smoke they emit when they catch fire. Detectors must also distinguish between the smoke produced as a by-product of cooking, or a “nuisance” fire, and a real fire, which could pose a threat to human life. Smoke & Flame Video Detection The new alarms feature “TruSense Technology”, which is designed to be able to differentiate between fast and smoldering flames and common false alarms. These technologies were developed in the hope that homeowners wouldn’t just simply remove smoke alarms or batteries due to frequent false alarms. Video Image Smoke Detection technology has been around the industry for a few years now, but full video detection is now being used to supplement it, in order to further the applications of this technology. A video image will then be processed by the software that then concludes whether the clip contains smoke or flames This tech uses video-based analytical algorithms that integrate cameras into advanced flame and smoke detection solutions. A video image will then be processed by the software that then concludes whether the clip contains smoke or flames. The algorithms used to distinguish smoke and flames can utilize several different metrics, such as a change in brightness, contrast and movement. Water Mist Suppression Systems Depending on the kind of system in place, these recognition tools can even offer security and other surveillance features too. This technology is ideal in locations with large surface areas, such as power plants, stadiums, shopping centers and warehouses and distribution centers, where a fire may be particularly challenging to locate using traditional methods. Flame Video systems trace fire to its origin to make for quicker, more effective extinguishment and evacuation. A major concern for most businesses in any industry is sustainability. Water mist suppression systems are able to fight fires using significantly less water than a traditional system. The water is stored under extreme pressure and is released using specialized sprinklers and spray heads. This enables the water is able to reach a far larger surface area since the droplets are much smaller. Exit Point Technology A water mist suppression system is also designed to cool down an area where fire and smoke are present, by blocking radiant heat and eliminating oxygen from the origin point. These systems are often used in areas that see a lot of foot traffic or buildings where the possibility of water damage would be detrimental. All Fire Alarm Systems must include notification appliances, such as bells, horns and strobe lights. Technological advances use directional sound to help evacuees determine the pathway to the fire exits But the latest devices now provide verbal instruction on what to do in the event of a blaze and tell people where to go to the nearest exit. It’s highly likely that evacuation may be hampered by black smoke and smog in a real-life emergency. This obviously makes visibility limited, thereby possibly making exit signs challenging to see. The latest technological advances use directional sound to help evacuees to determine the location and the pathway to the fire exits. New Sealing Sprinkler Guidance The audible sound is specially adapted to the human ear, meaning that someone could easily determine the direction and sound. While the previous entries in this list have been about products, it’s also absolutely vital that fire safety regulations are also developed alongside these products. Not only does this ensure the protection of occupants within the building, but also the structure of the building itself. For example, The Ministry of Housing, Government & Local Government announced tweaks to the Approved Document B (Fire Safety) which went into effect last November and applied to building works that started this January. These updates apply to blocks of flats and mixed-use buildings with top floors that are more than eleven meters above ground level. The legislation change means that C-PVC sprinkler pipes now need to be sealed with only specialist and approved products. The height threshold for a sprinkler system in residential flat blocks has been reduced from 30 to 11 meters.
7 Apparatus Trends For The Future Of FirefightingDownload
Hotel And Motel Fire SafetyDownload
Apartment Fire Safety TipsDownload
Wildland Fire Safety SummitDownload